RFID Multifunction System Operation Manual Ver 1.0 Version BR-RW-0004 Manufacturer and publisher Brillian Network & Automation Integrated System Co.,Ltd Add: No.41, Keyi St., Zhunan Township, Miaoli County 350, Taiwan, R.O.C. Tel: 886-37-580708 Fax: 886-37-580728 Email:services@brillian.com.tw The reproduction of any part of this user manual, in any from (by photocopying, microfilming or any other process) or the processing and distribution of the contents by electronic means Website:http://www.brillian.
Contents 1 2 3 4 5 6 7 8 9 10 Brief introduction of equipment ................................................................................................ - 1 Description of safety rule of BR-RW-0004 ................................................................................ - 2 Description of starting steps ..................................................................................................... - 3 Description of stopping steps ........................................................
1 Brief introduction of equipment Brillian Material Handling Solution(BMHS) We provide a FAB semi-automatic material handling solution. Through a material storage devices, integrating the BMHS system and database, product locations and determine the transmission route, optimal throughput and increase productivity. eRack management collects all eRack status information, exchanges information on behalf of all eRacks and MES. Provides admin search queries, work order inquiries, statistical analysis, etc.
2 Description of safety rule of BR-RW-0004 2.1 Instruction for use。 2.1.1 This manual is only written for Purge System Module。 2.1.2 Non-qualified or non-professional personnel are not allowed to operate or maintain the machine。 2.1.3 “Operator” should read carefully the software operation in advance。 2.1.4 “Maintainer”, in addition to getting familiar with software operation, should read carefully the maintenance manual and circuit diagram。 2.1.
1. 2. 3 Description of starting steps 3.1 Adapter to be AC 100~230V 4 Description of stopping steps 4.1 Please remove Adapter 5 Facility Requirement&SPEC When power is supplied, non-professional personnel should not operate it to avoid electric shock hazard. Before checking, maintenance and repair, please turn off the power. Product Name RFID Multifunction System Model Type BR-RW-0004 Rating(Adapter) I/P: 100~240VAC, 50/60Hz, 0.4A O/P:DC15V,1A 350 X 87 X 345 Weight kg Frequency 134.
for compliance could void the user authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
BR-RW-0004 Module Illustration Front-1 -5- Brillian Network & Automation Integrated System Co., Ltd.
BR-RW-0004 Hardware 8.1 Hardware Method Adapter AC100~240V To DC15V1A RFID AI2300 I/O LED Button RFID ANT LCD 9 Operation Description Put a POD fixed on the goods which you need to get goods information. The Transponder has a data record for the good During the Host computer sent a order message to the CIDRW through RS232 or HSMS The CIDRW will sent back the goods information which read from the Transponder by radio frequency. -6- Brillian Network & Automation Integrated System Co., Ltd.
10 Periodical Maintenance BR-RW0004 Maintenance Table Machine Tool: Item 1 2 Maintenance Content Clean Plate Reader Test □ Three months Cycle Date: Operator: Action Result Plate Clean Three months Use DI Water &Cleanroom wiper Clean Plate □OK □NG Three months Put the POD on Plate use button Check Reader Function □OK □NG Remark Remark: 10.1 Cleaning Plate 10.1.