RFID Multifunction System Operation Manual Ver 1.0 Version BR-RW-0002 Manufacturer and publisher Brillian Network & Automation Integrated System Co.,Ltd Add: No.41, Keyi St., Zhunan Township, Miaoli County 350, Taiwan, R.O.C. Tel: 886-37-580708 Fax: 886-37-580728 Email:services@brillian.com.tw Website:http://www.brillian.com.
Contents 1 2 3 4 5 6 7 8 9 10 Brief introduction of equipment ................................................................................................ - 1 Description of safety rule of BR-RW-0002 ................................................................................ - 2 Description of starting steps ..................................................................................................... - 3 Description of stopping steps ........................................................
1 Brief introduction of equipment Brillian Material Handling Solution(BMHS) We provide a FAB semi-automatic material handling solution. Through a material storage devices, integrating the BMHS system and database, product locations and determine the transmission route, optimal throughput and increase productivity. eRack management collects all eRack status information, exchanges information on behalf of all eRacks and MES. Provides admin search queries, work order inquiries, statistical analysis, etc.
2 Description of safety rule of BR-RW-0002 2.1 Instruction for use。 2.1.1 This manual is only written for Purge System Module。 2.1.2 Non-qualified or non-professional personnel are not allowed to operate or maintain the machine。 2.1.3 “Operator” should read carefully the software operation in advance。 2.1.4 “Maintainer”, in addition to getting familiar with software operation, should read carefully the maintenance manual and circuit diagram。 2.1.
3 Description of starting steps 3.1 Adapter to be AC 100~230V 4 Description of stopping steps 4.1 Please remove Adapter 5 Facility Requirement&SPEC RFID Multifunction System Model Type BR-RW-0002 Rating(Adapter) I/P: 100~240VAC, 50/60Hz, 0.4A O/P:DC15V,1A Length X Width X Height(mm) 350 X 66 X 345 Weight kg Frequency 134.2KHz 6 Product Name FCC Rules This device complies with Part 15 of the FCC Rules.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. -4- Brillian Network & Automation Integrated System Co., Ltd.
BR-RW-0002 Module Illustration Front-1 -5- Brillian Network & Automation Integrated System Co., Ltd.
BR-RW-0002 Hardware 8.1 Hardware Method Adapter AC100~240V To DC15V1A I/O LED Button RFID ANT RFID AI2300 LCD Barcode RS232 &DC5V 9 Operation Description Put a POD fixed on the goods which you need to get goods information. The Transponder has a data record for the good During the Host computer sent a order message to the CIDRW through RS232 or HSMS The CIDRW will sent back the goods information which read from the Transponder by radio frequency.
10 Periodical Maintenance BR-RW0002 Maintenance Table Machine Tool: Item 1 2 Maintenance Content Clean Plate Reader Test □ Three months Cycle Date: Operator: Action Result Plate Clean Three months Use DI Water &Cleanroom wiper Clean Plate □OK □NG Three months Put the POD on Plate use button Check Reader Function □OK □NG Remark Remark: 10.1 Cleaning Plate 10.1.