RFID BOX Multifunction System Operation Manual Ver 1.0 Version N2 BOX-08-01 Manufacturer and publisher Brillian Network & Automation Integrated System Co.,Ltd Add: No.41, Keyi St., Zhunan Township, Miaoli County 350, Taiwan, R.O.C. Tel: 886-37-580708 Fax: 886-37-580728 Email:services@brillian.com.tw Website:http://www.brillian.com.
Contents 1 2 3 4 5 6 7 8 Brief introduction of equipment ................................................................................................ - 1 Description of safety rule of N2 BOX-08-01.............................................................................. - 2 Description of starting steps ..................................................................................................... - 3 Description of stopping steps ..............................................................
1 Brief introduction of equipment Brillian Material Handling Solution(BMHS) We provide a FAB semi-automatic material handling solution. Through a material storage devices, integrating the BMHS system and database, product locations and determine the transmission route, optimal throughput and increase productivity. eRack management collects all eRack status information, exchanges information on behalf of all eRacks and MES. Provides admin search queries, work order inquiries, statistical analysis, etc.
2 Description of safety rule of N2 BOX-08-01 2.1 Instruction for use。 2.1.1 This manual is only written for Purge System Module。 2.1.2 Non-qualified or non-professional personnel are not allowed to operate or maintain the machine。 2.1.3 “Operator” should read carefully the software operation in advance。 2.1.4 “Maintainer”, in addition to getting familiar with software operation, should read carefully the maintenance manual and circuit diagram。 2.1.
1. 2. When power is supplied, non-professional personnel should not operate it to avoid electric shock hazard. Before checking, maintenance and repair, please turn off the power. 3 Description of starting steps 3.1 Turn on breaker power. 3.2 Facility department is suggested to be AC 100~230V 4 Description of stopping steps 4.1 Please use externally connected screen or remote control program to confirm all the ports Purge program are all in idle states. 4.
5 Facility Requirement&SPEC RFID BOX Multifunction System Model Type N2 BOX-08-01 Rating 100~230VAC, 50/60Hz, 1ɸ+PE Length X Width X Height(mm) 2175 X 1160 X 710 Weight 130kg Breaker electric current 5A Breaking capacity according to UL 10KA Frequency 134KHz 6 Product Name FCC Rules This device complies with Part 15 of the FCC Rules.
N2 BOX-08-01 Module Illustration Front-1 -5- Brillian Network & Automation Integrated System Co., Ltd.
N2 BOX-08-01 Hardware 8.1 Hardware Method serial port AC Power Cable Breaker Power Supply B1H2C6(UL489) Current 6A AC100~230V To DC15V FUSE 2A RFID MF Reader 8 PCS Antenna Fotek Sensor Frequency:134KHz Gateway Power Supply AC100~230V To DC24V 9 FUSE 4A 5DIO N2 BOX-08-01 Operation Description Put a POD fixed on the goods which you need to get goods information.
10 Periodical Maintenance 10.1 N2 BOX Maintenance Table N2 BOX Maintenance Table Machine Tool: Item 1 2 Maintenance Content Clean Plate Reader Test □ Three months Cycle Date: Operator: Action Result Plate Clean Three months Use DI Water &Cleanroom wiper Clean Plate □OK □NG Three months Put the POD on Plate use button Check Reader Function □OK □NG Remark Remark: 10.2 Cleaning Plate 10.2.