Content 1 2 3 General Information ................................................................................................................................................. 4 1.1 Profile.............................................................................................................................................................. 4 1.2 Safety Information .................................................................................................................................
4 5 Input method ........................................................................................................................................................... 16 4.1 Icons for Input Methods ................................................................................................................................ 16 4.2 To Shift Entry Methods ................................................................................................................................. 17 4.
5.11 Services ......................................................................................................................................................... 32 5.12 TV ................................................................................................................................................................. 33 6 Appendix ........................................................................................................................................................
1 1.1 General Information Profile Please read this pamphlet carefully in order to make your phone in perfect condition. Our company may change this mobile phone without prior written notice and reserves the final right to interpret the performance of this mobile phone. Due to different software and network operators, display on your phone may be different, refer to your phone for details. 1.
SWITCH OFF IN AIRCRAFT Wireless devices can cause interference in aircraft. Using a mobile phone in flight is illegal and risky. Please make sure that your mobile phone is powered off in flight. SWITCH OFF BEFORE ENTERING RISKY AREAS Strictly observe the relevant laws, codes, and regulations on the use of mobile phones in risky areas.
Use only in a normal and proper manner. EMERGENCY CALLS Ensure the phone is switched on and in service, enter the emergency number, e.g. 112, then press the Dial key. Give your location and state your situation briefly. Do not end the call until told to do so. Note: Just like all other mobile phones, this mobile phone does not necessarily support all the features described in this manual due to network or radio transmission problems. Some networks even do not support the emergency call service.
2 2.
2.2 Functions of Keys The mobile phone provides the following keys: Dial key Press it to originate a call by entering the called number or selecting a contact from the phonebook; or press it to receive an incoming call; or press it in standby state to show the latest call records End key Press it to end a call being dialed or end an ongoing call; or press it to exit the menu and return to the standby state; or hold it for two or three seconds to power on or off the mobile phone.
Press it in the edit interface to get a blank. Sym key Press it in the edit interface to input a symbol. Alt key In edit interface, press it to input an alternative symbol or number. Number keys, letters Press number keys or letter keys to in input or edit state to input numbers or letters; 2.3 Technical specifications Phone Dimensions (W×D×H):110×59.5×14.
Identification Number), PIN2, PUK (PIN Unlocking Key), PUK2 (PIN2 Unlocking Key), IMSI (International Mobile Subscriber Identity), network information, contacts data, and short messages data. Note: After powering off your mobile phone, wait for a few seconds before removing or inserting an SIM card. Exercise caution when operating an SIM card, as friction or bending will damage the SIM card. Properly keep the mobile phone and its fittings such as the SIM cards beyond children's reach.
is provided along with the mobile phone by the manufacturer. The initial phone lock code is set to 0000 by the manufacturer. If the phone lock code is set, you need to input the phone lock code when powering on the mobile phone. PIN The PIN (Personal identification number, 4 to 8 digits) code prevents your SIM card from being used by unauthorized people. In general, the PIN is supplied with SIM card by the network operator.
3.2 Installing T-Flash Card The T-Flash card is a pluggable mobile storage card inside the mobile phone. To install the T-Flash card, place its indented side downward, insert the card into the card slot. To remove the T-flash card, take the card out. Note: 1. The mobile phone cannot automatically identify the T-flash card being inserted when the mobile phone is powered on. You must power off the mobile phone and then power it on, so that the phone can identify the T-Flash card. 2.
Using a travel adapter: Install the battery into the mobile phone before charging the battery. Connect the adapter of the travel charger with the charging slot in the mobile phone. Ensure that the adapter is fully inserted. Insert the plug of the travel charger to an appropriate power outlet. During the charging, the battery level grids in the battery icon keep flickering till the battery is fully charged. It is normal of the battery to become hot during the charging period.
Power off the mobile phone before removing the battery. The charging process lasts a longer time for a new battery or a battery not in use for long. If the battery voltage is too low to enable the mobile phone to be powered on, charge the battery for a longer time. In this case, the battery icon does not flicker until a long time after the battery enters the charge status.
screen. Input the phone lock code and press the OK key if the mobile phone prompts you to input the phone lock code. The original code is 0000. Input the PIN and press the OK key if the mobile phone prompts you to input the PIN. The PIN is provided by the network operator for new opening SIM card. Enter the standby interface. To power off the mobile phone, hold the End key for a while. 3.
Answering incoming calls Press the Dial key or the Left soft key to answer an incoming call. Press the End key to end the current conversation. To reject an incoming call, press the End key or the Right soft key. Note: If the caller can be identified, the mobile phone will present the calling number. If the calling number exists in the phonebook, the mobile phone will present both the name and the phone number of the caller.
Numeric input:“123” English input in upper case:“ABC” English input in lower case:“abc” 4.2 To Shift Entry Methods Press shift key to switch between input methods. 4.3 Numeric Input You can input numbers with the numeric input method. Press a number key to input the corresponding number. 4.
Number key 0 * key # key 0 A* Q# English input: To input a blank, press Space. To clear wrong inputs, press the delete key. 4.5 Inserting a Symbol Press the sym key to enter the Select symbol interface and select a symbol you want. 5 5.1 Using the menu File manager The phone provides a certain space for users to manage files and supports the T-Flash card. The capacity of the T-Flash card is selectable.
not changed the directory, the root directory contains the default folders only. Format You can use this function to format all the data in the memory. The system will re-create a default folder. The formatted data cannot be recovered. Therefore, think twice before using the formatting function. 5.2 Phonebook The mobile phone can store up to 300 telephone numbers. The number of telephone numbers that an SIM card can store depends on the storage capacity of the SIM card.
5.3 multimedia message or Bluetooth. Add to blacklist: Add the selected number to blacklist. Mark several: Mark several phone numbers at a time so that you can perform a same operation on them. Caller groups: You can assign contacts to the five default caller groups. For each group, you can edit group name, set caller alert, call ringtone and caller picture. Phonebook setting: To set some parameters of phonebook. Fun & Games Games One game named F1 race is embedded in this menu.
Call Setting Caller ID: You can select the ID set by the network, hide the ID, or send the ID. By default, the ID set by the network is chosen. Note: This function relates to the network. If you select Hide ID, dialing may fail. Therefore, make sure that calls can be normally dialed before you choose Hide ID. Call waiting: After you choose Activate, the mobile phone will contact the network. A moment later, the network will make a response and send a message to acknowledge your operation.
Auto redial: Set it to On or Off to enable or disable auto redial. If you set Auto redial to On, the mobile phone will automatically redial the number a moment later if the called party does not reply. The number of auto redial times can be set to a maximum of 10. In the auto redial period, you cannot dial other numbers. To end the auto redial process, press the End key. Note: This function requires support from the network operator to which the SIM card is registered.
Drafts From the main menu select “Messages” to create text message. You can type a message, and you're also able to insert a pre-defined message from “Templates”. While writing a message, select “Options” to access all the messaging options. You can save your messages that you send often to “Drafts”. Outbox The messages which are sent failed are stored in the Outbox. Sent messages Sent messages are listed in this menu.
Broadcast Message This network service enables you to receive a variety of text messages, such as broadcast messages about weather forecast or road conditions. At present, few networks provide this service. Please consult the network operator. Receive mode: Set it to On to enable or Off to disable cell broadcast service. Channel settings: Select receiving some types of cell broadcast messages or edit/delete some channel numbers.
or right direction key to tune exposure value; up or down direction key to zoom in and zoom out. Image viewer You can view the pictures or images through this function. Video recorder This function enables you to record dynamic pictures. In the capture interface, press left or right direction key to tune exposure value; up or down direction key to zoom in and zoom out; OK key to capture videos clip. Video player Use this function to play video files.
FM Radio You can use the application as a traditional FM radio with automatic tuning and saved channels. In FM radio interface, you can press left or right direction key to search channels manually, down direction key to play/pause the playing process of the current channel, up direction key to enable auto search (once this is enabled, you can press left or right direction key to search channels automatically). You can press I/- or O/+ key to tune volume. 5.
Advanced: Some advanced settings. Calendar Once you enter this menu, there is a monthly-view calendar for you to keep track of important appointments, etc. Days with events entered will be marked. Tasks Choosing date, call or anniversary to create new memo, which you can view, add, edit, delete, delete overdue task, delete all, jump to date, send route and saved as file. If you have set the alarm for the memo, alarm will sound when time is up, the content of memo will display at the same time.
E-book reader E-book reader enables you to read TXT file. Through the USB connecting line putting files to E-book folder of phone or T-Flash card. After finishing downloading, you can find the folder and open the E-book to read text directly. Stopwatch Stopwatch is simple application for measuring time with possibility to register several results and suspend/resume measurement. 5.8 Settings Quad SIM switch Manually selected by user and automatically decided by SIM cards are available for you to choose.
Schedule power on/off: Set the time when the mobile phone will be automatically powered on or off. Alert: Before entering an area where the use of mobile phones is forbidden, make sure that the scheduled power-on function is deactivated to avoid accidents. Language: Select the display language for the mobile phone. Pref. input method: Select an input method as preferred input method as per your need. Display: Users can access this item to set wallpaper, screen saver, power on/off display, etc.
choose. Select one of them as per your need. Security Settings This function provides you with related settings about safety use SIM security PIN lock: To activate PIN lock, you need to input the correct PIN code. If you set PIN lock to On, you need to input the PIN each time you power on the mobile phone. In the case you input a wrong PIN for three consecutive times, you need to input the PIN Unblocking Key (PUK). The PUK is used to unlock and change the locked PIN.
Data account Access this interface to set GPRS parameter. 5.9 User profile The mobile phone provides multiple user profiles, so that you can customize some settings to adapt to the specific events and environments. Customize the user profiles according to your preference and then activate the user profiles. The user profiles fall into five scenarios: General, Silent, Meeting, Outdoor and My style. When you insert an earpiece to the mobile phone, the mobile phone automatically enters the Headset mode.
5.10 Social Networking MSN Log on MSN through this access. Facebook Log on Facebook through Java. Twitter Log on Twitter through a web page. Orkut Log on Orkut through a web page. 5.11 Services Opera mini Log on Opera mini through this access. Internet service This function enables you to view the internet. Your phone will ask you with existed way. You can start to view only by starting corresponding way.
Input Address: input the website to be searched and press finish button to access to the network directly Last web address: You can view your last visited web address through this function. Recent Pages: browse the record of the recently browsed web pages Settings: set up WAP-related service Note: Consulting the local network operator for related fee and specific setup. STK STK service is the tool kit of SIM card. This phone supports the service function .
SIM card error Poor received signal quality The SIM card is damaged. The SIM card is not in position. The metal face of the SIM card is polluted. Signals are obstructed. For instance, radio waves cannot be effectively transmitted nearby a high building or in a basement.
Line congestions occur when you use the mobile phone in high-traffic hours Avoid using the mobile phone in high-traffic hours The mobile phone cannot be powered on The battery energy is exhausted.
The mobile phone cannot connect the network The battery cannot be charged The SIM card is invalid Contact your network service provider The mobile phone is not in a service area of the GSM network Move to the network operator's service area The signal is weak The charging voltage does not match the voltage range indicated on the charger An improper charger is used Move to a place where the signal quality is high Ensure the charging voltage matches the voltage range indicated on the charger Use the
Poor contact Ensure the charger plug is in good contact with the mobile phone 7 FCC Regulations: This mobile phone complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
-Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 4RF Exposure Information (SAR) This mobile phone meets the government’s requirements for exposure to radio waves.
worn on the body, as described in this user guide, is 1.15 W/kg (Body-worn measurements differ among phone models, depending upon available accessories and FCC requirements.) While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement. The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines.