User Manual For （Avvio 418S/ Avvio 418） Dear customer: Thank you for choosing this mobile phone. This mobile phone incorporates the latest world advanced functions, enabling simple and convenient operation, satisfying your special requirements. The mobile phone supports T-FLASH (memory) card and Dual SIM standby(Avvio 418S).
Contents Safety precautions ........................................................................................................................... 4 About the phone .............................................................................................................................. 5 Display settings ............................................................................................................................. 5 Keys Functions......................................................
Phonebook................................................................................................................................... 16 Fun & Games .............................................................................................................................. 17 Call center ................................................................................................................................... 17 Call history ..................................................................
Safety precautions Please read and follow these concise rules carefully to prevent danger or breaking laws. Driving safety Do not use mobile phone when driving. Use the hands-free accessories if you have to use the phone. Put the mobile phone in the holder, instead of the passenger seat or any place that the phone will fall off. Power off in aircraft The interference of mobile phone will affect the flight safety and it is illegal to use mobile phone in aircraft.
Use the mobile phone in normal way. Do not put your mobile phone in the environment with too high temperature (higher than 60℃), for example, put it under the window which is irradiated by sunshine directly. Please use wet or antistatic cloth to clean your phone. Do not use the cloth with static to wipe the phone. Emergency call Make sure that the mobile phone is switched on and in service area, enter the emergency number (e.g. 110) and press the Call key to call the number.
Enter phone number and press this key to dial out by SIM1/SIM2 under dual Call key SIM mode; Press to answer the call when there is an incoming call; Press to enter call logs under standby mode. Press and hold this key to switch on/off the mobile phone; End key Press this key at non-editing screen to go back to standby screen. End the call. Press them to scroll the options when browsing a function list. In edit state, Navigation keys press direction keys to navigate.
Getting started First call 1> Insert the SIM card (switch off the phone first). For detailed installation guide, please refer to “Installing the SIM card”. 2> Charge the battery. Refer to “Battery and charging”. 3> Press and hold the End key to switch on the mobile phone. 4> If the display prompts, enter the four-digit password and press “OK “key. 5> If the display prompts, enter the PIN code (provided together with the SIM card) and press” OK”key.
Installing memory card Since the mobile phone doesn’t have enough space, you may need to install a memory card (T-FLASH card). To install the T-FLASH card: open the rear cover, take out the battery, insert the T-FLASH card into the slot, install the battery and then turn on the mobile phone. To remove the T-FLASH card: open the buckle and take out the T-FLASH card, and then lock the buckle. Note: T-Flash card is tiny. Please keep it away from children.
Using battery The performance of the battery is affected by various factors, including wireless network settings, signal intensity, environment temperature, the function or settings that you select, accessories and the mode of voice, data or other applications that you select.
Warning: Make sure that the local voltage and power match the rated voltage and power of the 2-in-1 charger. Switching on/off 1> Press and hold the End key to switch on the mobile phone. The screen shows the power on video. 2> If the phone lock is activated, please input the password and press “OK”key. The default password is 1122. 3> If the PIN code is activated, please input the code and press “OK”key. The PIN code is provided by the network operator. 4> Access standby interface.
please contact the local network operator. The SIM card may be damaged permanently if you try to decode by yourself. SIM2 PIN PIN code: The PIN (Personal Identity Number) code is provided with the SIM2 card and will prevent your SIM2 card from illegal operation. If the PIN lock is activated, the screen displays “Enter SIM PIN” when you turn on the mobile phone. While entering SIM2 PIN code, the screen shows * instead. You can get the PIN code when you get the SIM card from the network operator.
When the keypad is locked, the mobile phone will be locked automatically if there is no operation in certain period of time. To unlock: Press the left soft key and * key. Note: When the keypad is locked, it will be invalid. If there is new call, you can answer as usual, and the mobile phone will resume the locked status after the call Number keys In the dial interface, press and hold the # key to activate/deactivate the silent profile.
Making an IDD If you need to make an international call, press and hold the * key until the prefix symbol “+” of international long distance call appears on the screen , and you can make a call in any country (for example, +86 in China). Enter the prefix number, and then enter the country code and full phone number. The country codes are according to the international tradition, and Germany is 49, UK 44, Sweden 46, etc.
Making Calls ① Enter area code and phone number and press call key to dial out by SIM1/SIM2. ② Use right soft key to delete if there is wrong input. Press and hold right soft key to clear all characters. Note: Obstacles give lots of effects on calling quality moving around in a small range will improve signal strength effectively. Make an International Call ① Press * key for twice and sign “+”will come out.
Speed Dial If you already set the speed dial numbers and set the status for the open, then you can long press number key 2 to 9 to dial set numbers out under the standby mode.Long press number key 1 is to dial voice mailbox if you already set the mailbox number. Receiving a Call ① Press call key to receive incoming call. ② During a call, you can operate by pressing Left soft key: Hold, End single call, New call, Phonebook, Messages and so on. ③ Press end key to end a call.
Menu guide Phonebook You can store phone numbers on your SIM1/SIM2 card and in your phone’s memory. The SIM card and phone’s memory are physically separate, but they are used as a single entity called Phone Book. Select Phone Book and enter phonebook menu. You can view the list of contacts and add new contact in phonebook. Add new contact Select Use” Select” option menu to add a new contact to SIM1/SIM2 card or phone. Add new contacts to phone you can input name, number.
Send multimedia message: Send multimedia message to the selected contact. Call: Make a call. Edit: Edit the options of the contact with this function. Delete: Delete this entry. Move: Move the contact to another memory device. Copy: Copy the contact to current memory device. Add to blacklist: add the selected contact to blacklist. Phone settings: You can perform operations, such as: preferred storage, speed dial, my number and extra numbers and so on.
Note: It may be different from the actual call and service time in your network operator’s list. It depends on the network, billing and tax. Text msg.counter Sent or received messages counter in SIM1/SIM2.
service area), it will divert the incoming calls for you. Divert if no answer If you don’t answer the calls in specified time, the network diverts the calls for you. Divert if busy When you are calling, the network diverts the incoming calls. Divert all data calls Need network support. Cancel all diverts Cancel all divert settings. Call barring: Outgoing calls All voice calls: Set call barring for all outgoing calls. International voice calls: Set call barring for international calls.
Text message Text message is a network service. To send or receive text messages, you may need to subscribe for this service from your network operator. The text messages are sent to the message center and then to the recipients (GSM subscribers). The text messages are saved in the network if the mobile phone of recipient isn’t switched on or can’t receive text messages (memory is full). The validity depends on user’s settings and network operator.
Delete: Delete the message. Delete all: Delete all the messages in the Inbox of corresponding SIM card; if SIM1 is selected, all the messages in SIM1 will be deleted; if SIM2 is selected, all the messages in SIM2 will be deleted. Advanced: you can copy the selected message to SIM/phone, move the selected message to SIM/phone, copy all and move all. Drafts Save the edited text message and you can perform as follow operations, such as: view, send, edit, delete, delete all and advanced.
Templates You can use these templates during writing new message. Message settings Text message You can set the SIM1/SIM2 SMS parameters in this menu. SMSC address: Check and edit SMS center address. Validity period: Set validity period as 1hour/6hours/12hours/1day/3days/1week/Maximum. Message type: Set message type as Text/Fax group3/Fax group4/Page/Email. Delivery report: The network notifies whether the recipient has received the message or not.
Camera options: Option Description Switch to video recorder Switch from camera to video recorder. Photos View the saved pictures. Shutter sound: Set sound1; sound2; sound3 or Off. EV: set EV0; EV+/-0.5; EV+/-1; EV+/-1.5; EV+/-2. Contrast: set low; medium or high. Camera settings Avoid flicker: 60Hz (default), 50Hz. Delay timer: 5sec, 10sec, 15sec or Off. Cont.shot: set 1shot; 3 shots; 5 shots or Off. Image size: 640*480, 1280*960, 320*240, 128*160, 160*120.
EV: set EV0; EV+/-0.5; EV+/-1; EV+/-1.5; EV+/-2. Camcorder settings Night mode: set On/Off. Avoid flicker: 60Hz (default), 50Hz. Video setting Set the video quality of the recording White balance Auto, Daylight, Tungsten lamp, Fluorescent, Cloudy, and Incandescent. Effect settings Set normal, Grayscale, Sepia, Sepia green, Sepia blue and Color invert. Storage Memory card or Phone. Restore default Restore the default settings.
FM radio You can listen to the FM radio with the mobile phone. Channel list: Edit the channel name and frequency in the list. Manual input: Enter the frequency and return to the playing interface. Auto search: Scan channels automatically. Setting: Set the background playing. Record: Record in playing FM radio. File list: view record files. Organizer [File manager] Enter this menu; you can use the function to manage all types of files saved in the phone or memory card.
Mark several: Mark several files to copy, move or send via Bluetooth. Copy: Copy the files to folder in memory card or phone. Move: Move the files to folder in the memory card or phone. Delete all files: Delete all files in the current folder. Details: View the details of the selected folder. Videos – Video folder Play: Play the selected file. Send: Send the selected file via MMS/ Bluetooth. New folder: Create new folder. Rename: Change the name. Delete: Delete the selected file.
[Tasks] Create new tasks and you can select a task, and perform operations like View, Add, Edit, Delete, Delete overdue, Delete all, Jump to date and so on. If you have set alarm for the Tasks, the mobile phone rings and displays the Tasks when the specified time arrives. [Alarm] The time format of alarm clock is same to the clock. When the mobile phone is turned off, the alarm clock is still valid only if the battery voltage isn’t low.
Dual SIM settings You can set the dual SIM mobile phone accordingly: Dual SIM open; Only SIM1 open; Only SIM2 open; Phone settings In this menu, you can set the Language, Display, Pre.input method, Flight mode and so on. Time and date: Select home city, the time format and date format, and Update with time zone Set home city: You can set home city as your need. Set time/date: Set current time and date and turn on/off Daylight saving.
Security settings SIM1 security PIN lock: Activate/deactivate SIM lock (PIN code). Change PIN: PIN lock must be enabled and then you can change PIN. Change PIN2: You can change the SIM1 PIN to your private password in 4-8 digits (it need network support). SIM2 security PIN lock: Activate/deactivate SIM lock (PIN code). Change PIN: PIN lock must be enabled and then you can change PIN. Change PIN2: You can change the SIM2 PIN to your private password in 4-8 digits (it need network support).
User Profiles Profiles Setting: This mobile phone is provided with several profiles. You can customize the ringtone according to events and environment. You can customize a profile and activate it. Available options are: General, Silent, Meeting, Outdoor and My style. General You can customize the following items in General profile: Alert type: Set Ring only, Vib only, Vib and ring and Vib then ring as your needs. Ring type: Repeat and Beep once.
Bookmarks: You can make bookmark data in your phone. And you can connect to the site directly. Search or input URL: You search or input the URL of the site; you can go to the site directly by inputting the URL. Recent pages: When you choose [Recent Pages] menu, WAP (Wireless Application Protocol) browser opens the latest WAP page. Settings: This option allows you to set the WAP settings. You can set homepage, select profile, data account, browser options and preferences.
1、 SIM card is dirty. Clean the SIM card. SIM card error 2、 Re-install the SIM card. 3、 SIM card is damaged. Please change a new one. Check the icon of signal strength, where four strips indicate the strongest Weak signal signal and two or less strips indicate weak signal. (I) You have set to hide your own number, but the network operator doesn’t support this service. (II). The ambient has strong interference. Can’t make calls (III). You have enabled call barring. (IV).
Appendix D: Optional parts T-FLASH card This is also called as memory card, which is used to save data. Handsfree kits The handsfree kits include earphone and mini microphone, which are used for handsfree call. Shielded USB data cable In power off state, connect the mobile phone to PC with the Shielded USB data cable to access files and charge the battery. In power on state, connect the mobile phone to PC with the USB data cable to access the storage device.
4RF Exposure Information (SAR) This mobile phone meets the government’s requirements for exposure to radio waves. This phone is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg.
