Pan and Tilt Laser Scanner Warning: Warning content…… Product Name: Scanner, Pan and Tilt Trademark: BrightAI Apply for business name: BrightAI model : 810-00006
1. Overview Thank you for choosing our products! Please carefully read this product User Guide to ensure the quick to install and use this product. The Laser Scanner is a semi-automated device to accurately measure and digitally model swimming pools. This product is a custom, purpose-built opto-mechanical system that’s controlled by Latham Measure APP. 2. Components ①iPad ②Laser Scanner ③ AR Tags X 2 ④ Battery ⑤ USB-C cable ⑥ USB-C charger ⑦ Mount plate ⑧ Tripod ⑨ Screw mounting kit 3.
4. Wireless Wi-Fi: 2412-2462MHz 5180-5240MHz 5745-5825MHz 5. Installation a) Level the Tripod b) Mount the Mount Plate on the Johnny5 Adjust the position of the Mount Plate until the four screw holes of the Mount Plate are aligned with the screw holes on theScanner, and then use the Screw mounting kit to attach it.
Adjust the position of the scanner with Mount Plate until the center hole of the Mount Plate is aligned with the center hole of the Tripod. Insert the mounting screw of the tripod into the center hole of the scanner and tighten. d) Connect Scanner to the USB-C Cable e) Device Power There are two methods to power the Scanner:: using a 15V PD capable Battery or using a 15V PD capable USB-C Power Supply.. f) Follow the instructions in the Latham Measure app to control the Scanner.
Per FCC 15.407(c) and RSS-247 issue 2 clause 6.4a, the device will automatically discontinue transmission in case of either absence of information to transmit or operational failure.
