Tire Pressure Monitoring System Reader/Writer Outer case K812 Users Manual 1/6
Overview This device is equipped with TC55 (manufactured by Zebra Technologies Corporation), which has a dedicated application (Servicing App.) installed, becomes a device which communicates with the sensor mounted in the tire. Applicable regulations Radio Frequency Interference Requirements-FCC FCC CAUTION Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Name and function of each part The names and functions of each part are as follows. 1 2 3 5 4 6 ① POWER BUTTON (Extension) When this button is pushed, press the power button of the mounted TC55. ② POWER LED Lamp Outer case turns on when power is on. ③ Trigger BUTTON Press it when sending a command on the sensor communication screen. ④ Sensor communication LED Lamp Lights up when sensor communication is available. ⑤ Micro-USB Plug Connect to TC55.
How to install TC55 Follow the procedure below to install TC55 in the Outer case. Please install Servicing App. For TC55 to be installed before work. ① Remove the screws (4 places) with the supplied screwdriver, remove the cover, and make the USB connector vertical as shown in the right picture. ② Rotate the USB cap of TC 55 by 180 ° as shown in the photo on the left and insert TC 55 into the USB connector of Outer case.
③ Please TC55 to be parallel with Outer case. In that state slowly push it into the Outer case with both hands. In addition, the USB cap of TC 55 will be put in the position of the picture on the right. ④ Place the cover and fix the screws (4 places) with the supplied screwdriver to complete mounting. How to Sensor communication To communicate with the sensor in the tire, select the communication item on the TC55 screen and press the trigger button near the sensor (0.8 m or less) you want to measure.
△ CAUTION Failure to observe the following may lead to a short circuit or charging, causing the battery to start leaking or generate extreme heat, or the battery may even start a fire or explode. ● Never attempt to disassemble or modify the Outer case. ● Do not handle the Outer case with wet hands. Keep the product away from water. ● Always use batteries specified by TC 55. ● Be careful not to drop or step on the Outer case, or hit it against a hard object.