Tire Pressure Monitoring System TAG-READER Tire Pressure Monitoring System for Mining Trucks MODEL K712 series User’s Manual
How to measure Please follow our instructions so that you can measure five data in below table. ITEM Pressure VIEW ITEM SELECT psi Temperature ℃ Vehicle information Sensor information - Time - 1. Select Tire Monitor Application “Tire Monitor”. 2. Select “Operator” and press “NEXT” button. Explanation Displays tire pressure in 1psi increments. Displays tire temperature in 1℃ increments.
. Press “Launch TagRewriter Appli” button. 4. Point TAG-READER to tire side face which you want to measure. And put TAG-READER 2 close to the tire side face. -Please do not touch the TAG-READER on metal such as wheels. Otherwise, radio waves from the sensor will be blocked and data transmission will fail. 5.
6. Press Trigger button of TAG-READER. The button is locating left side wall. -Data measurement starts as soon as Trigger button is pressed.. -The measurement is only one time when you pressed trigger button. 7. Data are transferred from sensor in tire to TAG-READER. 8. When data transmission is completed, short beep sound come up. And the received data are displayed on the monitor. -If data transmission is failed, long beep sound come up. 9.
◆ How to charge the battery for PDA 1. Insert the connector of charger into the charger slot. Slot 2. Please remove the connector when the LED is solid green of PDA. LED ※ CAUTION Never attempt to disassemble or modify the TAG-READER. Do not handle the TAG-READER with wet hands. Keep the product away from water. Be careful not to drop or step on the TAG-READER, or hit it against a hard object.
Notices for using in USA/Canada This device complies with Part 15 of the FCC Rules and Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions:(1)This device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
