User's Manual

- 1 -

TITLE DATE 2013.11.25

Operation manual Model ORIGINAL NO. 224307

11S-US DRAWN IKEDA

(Transmitter) CHECKED MURAYAMA

APPROVED IKEDA

Item Operation

1. Battery preparation A battery is mounted in a case

(A new battery is used)

2. ID code number check Finishing of a setup already

The receiver end is set up previously

(The same ID number as a transmitter is used.)

(receiver)

3. Data transmission It is transmitted automatically

A pressure value is outputted from RS232C of a receiver.

*Protocol 9600bps,8bit,non parity,1 stop bit,

4. A method of operation Mounting of a battery will start transmission automatically.

5. Caution The user is cautioned that changes or modifications not expressly approved

by the party responsible for compliance could void the user's authority to

operate the equipment.

PAGE 1
TITLE DATE Operation manual Model 11S-US (Transmitter) Item 1. Battery preparation 2013.11.25 ORIGINAL NO. 224307 DRAWN CHECKED APPROVED IKEDA MURAYAMA IKEDA Operation A battery is mounted in a case (A new battery is used) 2. ID code number check Finishing of a setup already The receiver end is set up previously (The same ID number as a transmitter is used.) (receiver) 3. Data transmission It is transmitted automatically A pressure value is outputted from RS232C of a receiver. *Protocol 4.