User Guide
4 | Log In
Using a web browser visit brickhousesecurity.com/gps-login
OR open the BrickHouse TrackView App on your
mobile device.
Check your email account for an email with the subject
“Important: Your Password for GPS Login” to nd your
login information.
5 | View Tracking
Once you login you will be able to see the tracking reports
from your test drive.
You are now ready to begin tracking!
Get the most out of your BrickHouse Security GPS tracker
by customizing your account with GeoFences and Alerts.
www.BrickHouseSecurity.com
Don’t forget to activate your tracker! Visit activate.brickhousesecurity.com.
!
Livewire 4
Quick Start Guide
3 | Test Drive
After installing the tracker, take the vehicle for a 20-30 minute test
drive so that the Livewire may establish a GPS connection.
1 | Install the Wiring Harness and Connect the tracker
If you are not condent of your ability to install the device, we
strongly suggest that you contact a local mechanic or car stereo/
alarm installer.
Please reference the installation diagram in the product manual for
guidance on installing.
2 | Positioning the Tracker
When placing the device, make sure the side with the lights is
facing down. Try to place the device in an area of the vehicle
with as little metal obstruction as possible. Best placement will
vary by vehicle.