Easy Installation Guide Hydra Series Megapixel Extendible Network Camera PH-100Ah Kit Series
Package Contents a. Video Box (VB-03) b. Network Camera (Optional) * PH-100Ah-00 PH-100Ah-01 c. Product CD d. Mounting Bracket e. Warranty Card f. Screw Bag g. Easy Installation Guide (*) The actual device and quantity vary with the product’s configuration.
Hardware Installation Step 1. Power and Ethernet Connection a. Power on the camera with PoE switch: Use an Ethernet cable to connect VB-03 to the PoE switch. PoE Switch b. Power on the camera with PoE injector: i. Use an Ethernet cable to connect VB-03 to PoE injector. ii. Use an Ethernet cable to connect the PoE injector to the non-PoE switch. iii. Connect the PoE injector to a power outlet.
c. Power on the camera with DC12V 1A power adaptor. Router/ Computer/ NVR/ Switch Step 2. Terminal I/O Block Adaptor Pin Definition (from left to right) 1. Ground 2. 3. 4. 5. 6. Digital Input Digital Output Power +12V Ground Digital Input 7. Digital Output 8.
Step 3. Camera Installation To extend the length of lens, we provide the 5-meter extension cable called “EXCB-5M” for you. Please refer to the following link to get more information about it if you need it. (http://www.brickcom.com/products/Accessory/index.php?series=Others#) Step 4. Check the Lens Module Connections and LED Indicators Please make sure you have plugged in all the needed lens modules to the VB-03, and make sure the corresponding LED indicators are lit.
Software Installation Step 1. Install EasyConfig Insert the CD into the CD-ROM, and follow the instructions of the InstallShield Wizard. If you have problems with the CD, the EasyConfig software can also be downloaded at the Brickcom web site: http://www.brickcom.com/support/download.php. Step 2. Launch EasyConfig Launch the EasyConfig software, and select Simple Mode. Then, choose the desired camera from the survey list to connect. Step 3.
Step 4. Log in to Camera Key in the username and password on the log-in window. The default username and password are “admin” and “admin”. Step 5. Install Plug-in Please click to install the plug-in for Internet Explorer.
Viewing Video Streams with Internet Explorer Step 1. Check the Video Stream Settings On the camera's web UI, please go to Configuration → Camera/Video/Audio → Video, and you will find the stream 1, stream 2, and stream 3 settings. Please make sure the video stream corresponding to the connected lens module is enabled. (Stream 1 corresponds to the lens module connected to lens port 1, and so on.) Step 2.
Viewing Video Streams with BRC64 Step 1. Launch BRC64 Double click on the Windows desktop to launch BRC64, or click it on the program menu. ○i Please make sure the version of BRC64 is v1.2.4.144 or above. Step 2. Search for the Camera Click on the control panel to start searching for the cameras on the LAN. No matter how many lens modules you plug in the VB-03, three camera items will be displayed with the same name on the control panel.
Step 3. View 3 Streams Simultaneously For each video stream you want to view, please select the camera item on the control panel. Then, drag and drop it to the video matrix for live view.
If the lens module hasn’t been pluggged in the VB-03, the “Reconnecting” message will be shown, and you won’t be able to view the image of this lens module. Please check if the lens modules are successfully plugged in the VB-03.