Customer Service: support@ breezary.
Table of Contents Table of Contents..................................................2 Installation Instructions.........................................4 Safety Information.................................................2 Remote Contorl Instructions ................................6 Dimension Reference............................................3 Troubleshooting Guide ........................................7 Hardware Included................................................3 Fan Parts Included......
Screw Anchor 4 4 Fix Screw Item Name Installation Plate Motor Assembly Remote Control Emitter （Batteries not included） 4 Quantity
STEP.1 INSTALLATION WALL STOPPER Caution：Turn off all switches and make sure there is no power when installing . If it is a cement roof, four holes need to be drilled according to the position of the holes on the installation plate, and then inserted into the wall plug. If it's a wooden roof, it doesn't need to be. STEP.2 INSTALLATION PLATE - Thread the power cord through the holes on the installation plate and lock it at the top with four wooden screws.
STEP.3 INSTALLATION MOTOR ASSEMBLY - Hang the safety rope of the fan onto the hook on the installation plate. Hook Safety rope - Connect the green ground wire to the ground wire.Connect the white wire to the zero wire.Connect the black wire to the fire wire. Zero wire Frie wire Black wire White wire Ground wire Green ground wire - Clip the keyhole on the fan connection plate into the two screws on the installation plate.Then tighten the four screws.
Remote contorl instruction -Please pair the remote with the fan before using it. - Open the battery cover on the hand-held remote and install a battery, pair of AAA emitter (1.5V) that are not included. Indicator Light Fan Speed S Fan Stop S Light On/Off Natural Wind All Off Pairing Code Timer 1/2/4 h Color Temperature Change Remote control pairing code: Turn on the power, and press the pairing code button . . within 5 seconds.
work Observe the fan for 24 hours after installation. Most noises associated with a new fan disappear during this time.
