Caution :You must read this before you proceed Armless Sofa Chair Label Description QTY A Chair Seat 1 B Backrest 1 C Back Cushion 1 D Leg 4 Description QTY Washer Ring 7 Label ① Picture Picture 1 of 7
② Allen key 1 ③ Bolt M8*20mm 2 ④ Spring Washer 2 ⑤ Flat Washer 2 ⑥ Connecting Piece 1 Before Beginning Assembly: Back Cushion (C) Backrest(B) Chair Seat(A) Leg (D) FRONT FACING Leg (D) Leg (D) 2 of 7
This Armless Sofa Chair has multiple parts and may require up to some 30 minutes to assemble. To give you an overview of the Armless Sofa Chair parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly. Step 1 C A Position the Chair Seat(A) on its back,as shown. Unzip to open pouch and remove the 4 wooden legs and Back Cushion , close the pouch.
Step 3 Cover the bottom of the Chair Seat(A) with the non-woven fabric. Smooth down the Magic Tape on all four sides of the Seat by hand. Step 4 Backrest(B) Chair Seat(A) Position Sofa Chair right side up. Align the mounting positions on the Chair Seat(A) . Insert the Backrest (B) into the Chair Seat (A) as shown in above picture. Step 5 Back Cushion (C) Put the Back Cushion(C) on the Sofa Chair.
Step 6 Your Armless Sofa Chair is ready for use. YourArmless Sofa Chair can only be used on a flat, level surface. If you already purchased 2 or more than 2 products, Please read on Step 1 Position the Sofa Chair on level surface,as shown. Attach the Connecting Piece(⑥) to Chair Seat(A) using Bolts(③), Spring Washers(④), and Flat Washer (⑤) with Allen Key(②) as shown in the right picture.
Step 2 ⑥ ⑥ ⑥ ⑥ Connecting the two sofas by using the pre-fixed Connecting Piece (⑥) as shown in the picture. Step 3 Step 3.1 Step 3.2 Step 3.3 Step 3.4 Step 3.5 Note: This is optional step in case we want to connect all sofas in a set together and to match the environment of your home.
of 7
