Caution :You must read this before you proceed Ottoman Label Description QTY A Ottoman 1 B Leg 4 Description QTY Washer Rings 7 Label Picture Picture ① Before Beginning Assembly: 1 of 5
Ottoman(A) Leg (B) Leg (B) Leg (B) FRONT FACING This Ottoman has multiple parts and may require up to some 30 minutes to assemble. To give you an overview of the Ottoman parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly. Step 1 A Position the Ottoman on its back,as shown. Unzip to open pouch and remove the 4 wooden legs, close the pouch.
Install the Legs(B) into the bottom of the Ottoman(A) by placing a Washer Ring(①) onto the threaded stem of the Legs. And then insert the threaded stem into the threaded mounting position at each Corner of the Bottom of the Ottoman(A). Tighten by turning the Legs clockwise. Note: The use of Washer Rings(①) are OPTIONAL and are especially useful to help alleviate slight wobbles. Some Legs may need more than one Gasket whilst some Legs may not need any.
If you already purchased 2 or more than 2 products, Please read on Step 1 Step 1.1 Step 1.2 Step 1.3 Step 1.4 Step 1.5 Note: This is optional step in case we want to connect all chairs in a set together and to match the environment of your home.