Installation & Assembly

ManualsBrandsBreakwater Bay Manuals7-8 Person Patio Conversation SetsSolid Wood 7 - Person Seating Group with Cushions

Assembly Instructions

Caution: You must read this before you proceed

Ottoman

Caution: This Table is NOT a TOY.

Keep your child/children at bay during the assembly process.

Whenever moving/lifting the Table and to prevent damage to the Table, two

adults are required to execute these actions.

1 of 6

Summary of content (6 pages)

PAGE 1
Assembly Instructions Caution: You must read this before you proceed Ottoman Caution: This Table is NOT a TOY. Keep your child/children at bay during the assembly process. Whenever moving/lifting the Table and to prevent damage to the Table, two adults are required to execute these actions.
PAGE 2
Part List Description Qty O Leg Panel 2 P Side Panel 2 Q Seat Panel 1 R Seat Cushion 1 Description Qty Label Picture Hardware No.
PAGE 3
Assembly Preparation Before Beginning Assembly: Assembly Steps Overview Seat Cushion (R) Side Panel (P) Leg Panel (O) Seat Panel (Q) FRONT FACING This Ottoman has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Ottoman parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
PAGE 4
Step 2 Place Leg Panel(O ) facedown as pictured above. Insert the tenons on Side Panels(P ) into the mortises of Leg Panel(O ). Attach Side Panels(P ) to Leg Panel(O ) using Bolts(⑦) with Allen Key(⑨). Repeat the same process with the remaining Leg Panel(O ). Do not fully tighten the Bolts. Step 3 Insert Seat Panel(Q ) into assembled Ottoman frame as pictured above. Attach Seat Panel(Q ) to Side Panels(P ) using Screws(⑧) with Allen Key(⑨). Note: Insert Screws(⑧) from inside to outside of Seat Panel(Q ).
PAGE 5
Step 4 Adjust Pre-installed Place the Ottoman onto a flat, level surface. Then EXERT pressure, floorwards onto the Ottoman with both hands. This pressure will help the Ottoman reach full alignment at all joints. In a sequential manner, gradually tighten all Bolts and Screws at all joints until evenly secured. Inspect the Ottoman and make sure all parts are adequately connected. Adjust the Levellers until the Chair is level with the ground.
PAGE 6
of 6