Use and Care Manual

Architectural Coatings PPG Break-Through! Interior/Exterior Water-Borne Acrylic Gloss
GENERAL DESCRIPTION PRODUCT DATA
RECOMMENDED SUBSTRATES
A versatile, ultra-durable water-borne acrylic, Break-Through!, is for-
mulated to bond to some of the most difficult substrates including
fiberglass, ceramic tile, laminate, and many plastics. The interior/exte-
rior satin finish offers very fast dry and outstanding early block resist-
ance for increased productivity with less down time. Break-Through!
provides hardness similar to or better than standard alkyds but main-
tains flexibility to endure extreme bends and deformation without
cracking and peeling. Break-Through! is ideal for doors, windows,
shelving, fixtures, trim, wood and concrete floors.
Aluminum Galvanized Steel
Ceramic Tile Gypsum Wallboard-Drywall
Concrete Interior Wood
Concrete/Masonry Block Laminate
Ferrous Metal Plaster
Fiberglass Vinyl and Architectural Plastics
PRODUCT TYPE: Water-Borne Acrylic
SHEEN: Gloss, >70 @60º
VOLUME SOLIDS*: 37% +/- 2%
WEIGHT SOLIDS*: 49% +/- 2%
WEIGHT/GALLON*: 10.3 lbs. (4.7 kg) +/- 0.2 lbs. (91 g)
VOC: <250 g/L (2.1 lbs./gal.)
*Product data calculated on product V70-610.
COVERAGE: Approximately 400 sq. ft. (37 sq. meters) per U.S. gallon
(3.78 L) on primed, smooth, nonporous surfaces.
Wet Film Thickness: 4.0 mils
Wet Microns: 102
Dry Film Thickness: 1.5 mils
Dry Microns: 38
Coverage figures do not include loss due to surface irregularities and
porosity or material loss due to application method or mixing. Some col-
ors, drastic color changes, or porous substrates may require more than
one coat to achieve a uniform finish.
DRYING TIME: Dry time @ 77ºF (25ºC); 50% relative humidity.
To Touch: 15-20 minutes
To Handle 1 hour
To Recoat: 2 hours
For Foot Traffic 12 hours
For Forklift Traffic 24 hours
To Full Cure: 7 days
Allow 24 hours before normal use. Drying times listed may vary
depending on temperature, humidity, film build, color, and air movement.
CLEANUP: Clean tools with warm, soapy water.
DISPOSAL: Contact your local environmental regulatory agency for
guidance on disposal of unused product. Do not pour down a drain or
storm sewer.
FLASH POINT: Over 200ºF (93ºC)
PRODUCT INFORMATION
V70-610 White & Pastel Base
V70-620 Midtone Base*
V70-630 Deeptone Base*
V70-640 Ultra Deep Base*
V70-9 Black
V70-5 Safety Red
V70-46 Safety Yellow
V70-V Clear
*Must be tinted before use.
Refer to the appropriate color formula book, automatic tinting equip-
ment, and or computer color matching system for color formulas and
tinting instructions.
V70-610
BREAK-THROUGH!
®
V70-610 Series
Read Label and Safety Data Sheet prior to use. See other cautions on last page.
FEATURES / BENEFITS
Features Benefits
Outstanding Early Block Resistance Provides tack free film idea for doors, windows, cabinets, and shelving
Excellent Adhesion Bonds to a wide variety of difficult substrates
Very Good Hardness Durability and hardness similar or better than conventional alkyds
Very Quick Dry Dry to touch in 15-20 minutes, reducing down time
Excellent Flow & Leveling Provides enamel with a smooth finish
Flexible Withstands bends with no cracking or peeling
Resistant to Household Chemicals Ideal for use in areas requiring frequent cleaning with mild household
cleaners or light duty industrial cleaners