Scouting Cam BLACK300 Instruction Manual BRAUN PHOTO TECHNIK GmbH Klingenhofstraße 72 90411 Nürnberg www.braun-phototechnik.
Inhalt 1. Caution ............................................................................................................... 3 2. Instructions ........................................................................................................ 4 2.1 Camera Body Interface ................................................................................. 4 2.2 Camera components and features ................................................................ 4 2.3 Remote Control...........................
4.5 Firmware Upgrade ...................................................................................... 14 Appendix: Technical Specifications.................................................................... 15 1. Caution 1) Do not drop, knock or shake the camera. 2) The working voltage of the camera is 6.0V. The camera is supplied by eight AA batteries. 3) Remove batteries from camera if camera is not be used for some time.
2. Instructions Thank you for purchasing BRAUN Scouting Cam BLACK300. This camera is a surveillance camera working automatically. It can be triggered at once by any movement of human (or animals) in a certain region of interested (ROI) monitored by a high sensitive Passive Infrared (PIR) motion sensor, and then automatically captures high quality pictures (up to 12MP) or records 1080p HD video clips (WVGA or QVGA).
7) Lens 8) 2 inch color LCD Display 9) Sound recorder 10) Lock 11) Power switch (ON, TEST, OFF) 12) Battery Depot 2.3 Remote Control The remote control is an input device of the camera and is primarily used for customer settings and password input. This is an infrared type wireless remote control. The maximum remote distance is 9 meters. 2.3.1 Navigating Press UP or DOWN to select or highlight the menu item, while press LEFT or RIGHT to select the option of each item and press OK to make selection.
3.Image Size 2.Camera Mode 4.Battery Level 1.SD Card 5.Date (M:D:Y) 6.Time (H:M:S) 7.Available Picture space 2.5 Supported Format Item Format Photo JPG Video AVI File Format FAT32 You don’t need to concern about the file system format of the camera unless you have problems with reading the SD-card by your other equipment. If this happened, please format the SD-card in the camera or in a computer at first and then reinsert the card into your camera to make a try. 3. Easy Operation 3.
3.2 Insert the SD-card Insert SD-card into the card slot with marked side upwards. Please note that the SD-card can only be plugged in one direction. 3.3 Power on and Enter into the ON Mode Before switching on, please pay attention to the following: 1) Avoid temperature and motion disturbances that could be construed as animals or humans such as trees that are exposed to direct sunlight for much of the day or any other heat source.
described in “Advanced Operations” chapter. 3.5 Power Off Slide the power switch to OFF position to power off the camera. Please note that even in the OFF mode, the camera still consumes certain power at µA level. 4. Advanced Operations From the basic operations of the camera in previous chapter, we know that the camera has three basic operation modes (Power switch): 1) OFF mode: Power switch is at OFF position (Right). 2) ON mode: Power switch is at ON position (Left).
4.1.2 Video Setting 4.1.
4.1.
d) e) f) g) Press RIGHT to select SD Card. Press OK to choose Enter to enter into submenu. Press down to select OK. OK will be highlighted. Press OK to start formatting the SD-card. During formatting, the display screen will show a message “Please Wait”. h) Press MENU to cancel setting and return to info display. 4.1.8 Set Photo Size This parameter has three values: 12MP, 8MP and 5MP. The default value is 5 mega pixels.
4.1.11 Set Multi This parameter affects the number of pictures taken for each triggering in the camera mode. It has four values: “1 Photo”, “3 Photos” “6 Photos” and “9 photos”. Its default value is “1 Photo”. The following shows how to set photo burst to 3 Photos, provided that the previous option is 1 Photo: a) Press MENU to display the setting menu. b) Press DOWN to select Multi. c) Press RIGHT to select 3 pictures. d) Press OK to save the current setting, then press MENU to return to info display.
that previous option is 5 seconds. a) Press MENU to display the setting menu. b) Press DOWN to select Delay. c) Press RIGHT to enter in to the interval setting. d) Press DOWN to select 1 minute. e) Press OK to save the current setting, then press MENU to return to info display. f) Press MENU to cancel setting and return to info display. 4.1.16 Set Timer This parameter defines a certain time lapse in a day when the Camera can be triggered. In the rest of the time the device is shut off.
on camera, TV monitor or Image viewer with TV-in connector. c) Press Left to start playing the video when viewing d) Press Left again to stop playing the video. e) Press UP to view the previous picture (or video) and DOWN for the next. f) Press OK to return to info display. When viewing images, the total number of all images in the SD-card and the index of the displaying image will be shown respectively. 4.2.
camera, its screen is black. 6. The screen will light on after being finished 7. Plug out the SD card, then insert it into pc, delete the FW18NA.bin in the SD card.(If you don't do this, the camera will enter update mode when power on again). 8. Insert the SD card into the camera for its working. Appendix: Technical Specifications Image sensor 5 Mega Pixel Color CMOS (12 MP interpolated) Memory SD Card ( up to 32GB) Lens F=3.