® User Manual ® Universal Programmable Smart Wi-Fi Thermostats 7300 For 1 Heat / 1 Cool Systems 7305 For Systems Up to 3 Heat / 2 Cool See Wi-Fi Setup Guide for Wi-Fi Setup Instructions Read all instructions before proceeding Store this manual for future reference ©2016 Braeburn Systems LLC • All Rights Reserved • Made in China.
Contents 1 About Your Thermostat Thermostat Features ................................................ 3 Thermostat and Display ........................................... 4 2 Setting User Options Advanced User Options ............................................ 8 Table of User Options ............................................... 9 Service Monitors (Filter, UV and Humidifier Pad) ........ 10 Extended Hold Time Period .....................................10 Temporary Override Adjustment Limit ............
Congratulations! You are in control of one of the easiest-to-use thermostats on the market today. This thermostat has been designed to provide you with years of reliable performance and comfort control. Features • Optional Wi-Fi connectivity – control and monitor thermostat from a smartphone, tablet or computer. • 7 day, 5-2 day or non-programmable • Auto or manual changeover • Residential or commercial modes • Large 5 sq. in. bright blue backlit display is easy to read.
1 About Your Thermostat 7 8 9 1 10 11 12 13 14 2 15 3 User Manual BACK NEXT 4 5 4 6
Thermostat Display 1 Room Temperature....................... .Displays the current room temperature 2 Set Temperature........................... .Displays the current set point temperature 3 Outdoor Temperature Indicator.... .Displays along with the outdoor temperature reading** 4 BACK Indicator*............................ .BACK button is active 5 NEXT Indicator*............................ .NEXT button is active 6 Service Indicators . ..................... .
1 About Your Thermostat 22 INSTRUCTIONS 23 15 BACK NEXT 18 19 DAY/TIME 16 17 24 User Manual 6 20 21
Thermostat 15 Reset Button ................................ .Resets current time, program and user settings 16 SYSTEM Button............................. .Selects the system you want to control 17 DAY/TIME Button........................... .Sets the current time and day of the week PROG Button................................. .Selects programming mode or press for 3 seconds to select SpeedSet® BACK Button*................................ .
2 Setting User Options INSTRUCTIONS Advanced User Options User options allow you to customize some of your thermostat’s features. Most users will not need to make any changes to the settings in this section. INSTRUCTIONS To access the User Options menu, press and hold the RETURN button for approximately 3 seconds until the screen changes and displays the first User Option. Press the SpeedBar ® or to change the setting for the displayed User Option.
Table of User Options NOTE: Some user options may not be available, depending on how your thermostat was configured in the Installer Settings (see Installer Guide). A detailed description of each User Option follows this table. No. User Options Factory Default Setting Options Comments Pg. 1 Filter Service OFF OFF Monitor 30, 60, 90, 120, 180, 365 Disables filter service monitor feature.
Service Monitors (Filter, UV and Humidifier Pad) User Options 1, 2 and 3 There are three user selectable service monitors that will display reminders for a required air filter, UV bulb or humidifier pad replacement. The SERVICE segment flashes in the display along with FILTER, UV or HUMID. When the service interval has been reached, and required cleaning or replacement has been performed, press the RETURN button to reset the timer. Select OFF or a set number of days before the reminder will appear.
Temporary Override Adjustment Limit User Option 5 The Temporary Override Adjustment Limit will limit how much the temperature can be adjusted from the current set point when the thermostat is used in the programmable mode. This setting will not allow the user to override the temperature past the selected limit amount of 1, 2 or 3 degrees from the current set point. When the user reaches the adjustment limit the screen will flash ADJ. A setting of 0 disables the adjustment limit.
Wi-Fi Clear User Option 8 Use this setting if you no longer want to be connected to your Wi-Fi network or if you change Wi-Fi routers. Select WIFI to skip changes to your network settings. Select CL WIFI to clear all Wi-Fi network settings. You can set up Wi-Fi again at a later time if desired (see Wi-Fi Setup Guide). 3 Setting Your Program Schedule Setting the Time and Day 1. In normal operating mode, press the DAY/TIME button.
Tips Before Setting Your Program Schedule • Make sure your current time and day of the week are set correctly. • When programming, make sure the AM and PM indicators are correct. • Various installer settings such as auto changeover mode and temperature adjustment limits may affect your programming flexibility. • Your NIGHT event cannot exceed 11:50 p.m. • BACK and NEXT are secondary functions of the PROG and HOLD buttons (see page 7).
Energy Saving Programs This thermostat comes pre-programmed with a default energy saving program. The following tables outline the pre-programmed times and temperatures for heating and cooling in each of your 4 daily events (2 events if configured for commercial mode).
Residential 5-2 Day Programming– Weekday/Weekend Factory Settings 4 Event Weekday Weekend MORN Time: 6:00 am Heat: 70˚ F (21˚ C) Cool: 78˚ F (26˚ C) Time: 6:00 am Heat: 70˚ F (21˚ C) Cool: 78˚ F (26˚ C) Time: 8:00 am Heat: 62˚ F (17˚ C) Cool: 85˚ F (29˚ C) Time: 6:00 pm Heat: 70˚ F (21˚ C) Cool: 78˚ F (26˚ C) Time: 10:00 pm Heat: 62˚ F (17˚ C) Cool: 82˚ F (28˚ C) Time: 8:00 am Heat: 62˚ F (17˚ C) Cool: 85˚ F (29˚ C) Time: 6:00 pm Heat: 70˚ F (21˚ C) Cool: 78˚ F (26˚ C) Time: 10:00 pm Heat: 62˚ F (17˚
Programming a 7 Day Residential Schedule The 7 day residential programming mode gives you the option to program individual days (1 day at a time) or to use SpeedSet and program the entire week (all 7 days) with a 4 event program schedule. Setting All 7 Days at Once (SpeedSet®) NOTE: Setting all 7 days at once will copy over any previously programmed individual days. 1. Hold the PROG button for 3 seconds. The display will switch to SpeedSet programming mode.
Setting Individual Days (7 Day Residential) 1. Press the PROG button. The display will switch to programming mode. M (Monday) will be displayed and the hour will be flashing. 2. Press SYSTEM to select HEAT or COOL. 3. Press DAY/TIME to select the day you would like to program. 4. Press the SpeedBar® up or down to adjust the hour for the MORN (morning) event. Press NEXT. 5. Press the SpeedBar up or down to adjust the minute for the MORN event. Press NEXT. 6.
Programming a 5-2 Day Residential Schedule The 5-2 day residential programming mode allows you to program Monday - Friday with one 4 event schedule and then allows you to change Saturday and Sunday with a different 4 event schedule. 1. Press the PROG button. The display will switch to programming mode. The days M, TU, W, TH, and F will be displayed and the hour will be flashing. 2. Press SYSTEM to select HEAT or COOL. 3. Press the SpeedBar® up or down to adjust the hour for the MORN (morning) event.
Programming a 7 Day Commercial Schedule The 7 day commercial programming mode gives you the option to program individual days (1 day at a time) or to use SpeedSet and program the entire week (all 7 days) with a 2 event program schedule. Setting All 7 Days at Once (SpeedSet®) NOTE: Setting all 7 days at once will copy over any previously programmed individual days. 1. Hold the PROG button for 3 seconds. The display will switch to SpeedSet programming mode.
Setting Individual Days (7 Day Commercial) 1. Press the PROG button. The display will switch to programming mode. M (Monday) will appear and the hour will flash. 2. Press SYSTEM to select HEAT or COOL. 3. Press DAY/TIME to select an individual day. 4. Press the SpeedBar® up or down to adjust the hour for the OCCUPIED event. Press NEXT. 5. Press the SpeedBar up or down to adjust the minute for the OCCUPIED event. Press NEXT. 6. Press the SpeedBar up or down to adjust the temperature for the OCCUPIED event.
