BOYO VTHUDpro Car Head-up Display Installation & User Manual
Thank you for choosing Head-up Display from BOYO Vision. Please read this Manual carefully before installing and using the Product to enhance driving pleasure. Warning: Do not use the head-up display, if it causes distraction while driving.
About VTHUDpro Through innovative product design concepts, VTHUDpro is an interactive device, designed to improve driving experience. While keeping eyes on the road and hands on the steering wheel, get a best direction and navigate to your destination, make or answer phone calls, listen to music, and even send/receive messages while driving.
Package Contents Please check the package contents.
1. Installation Step1. HUD installation. Assemble the base unit and the main body. Find position on dashboard. Remove adhesive protection cover from the bottom of the base unit and fix on the dashboard. Step 2. Connect power • If your car has OBD-II port, find and connect using the OBD-II cable. OBD-II will provide vehicle speed and engine speed. Check your vehicle manual for the OBD-II connector location. • If your car does not have OBD-II port, use 12V adaptor to connect.
Step 4. Connect iOS mobile device with CarPlay or Android mobile device with Android Auto to VTHUDpro. USB connection is on the right side of the main unit. For Google Auto users: For some mobile phones, you may also be asked to install supporting Apps. Apps for Android Auto are available from the Google Play store. Please go to the Google App market place and search for ”Android Auto-...” and download.
When Android phone is connect to the phone, VTHUDpro automatically launches the Google Auto interface and projects it onto the image combiner. Open the phone’s Bluetooth settings interface, search for HUD_BT Bluetooth device, and connect. Enter 0000, Bluetooth PIN code is needed for connection, Step 5. Turn ‘on’ the VTHUDpro switch. The switch is located on top side of the main unit. Turn on the engine and you are ready to use the VTHUDpro.
2. Before Using 2.1.
Remote control pairing: The remote control and the HUD main body are connected via Bluetooth. If the remote-control buttons are not working, manual pairing may be required. To pair: press the upper and lower keys (red arrows) at the same time within 8 seconds of turning on the main unit. Press both keys over 8 seconds and it will be paired successfully If the remote control is still not working, please check the battery. Battery (CR2016) in the remote control may need to be replaced. 2.2.
3. Using VTHUDpro 3.1. Use the “voice assistant” as much as possible. VTHUDpro supports voice control. Press the “Voice assistant” button to activate the voice assistant. Then say a command. For example, “call Charles”, “send massage ‘give me a call’ to Ester” or “start Waze” to make a phone or to start Waze app. etc. 3.2. Using the remote control buttons Apple CarPlay Interface Use remote control buttons, “Previous item” and “Next item” and “OK” to select from displayed options.
Android Auto Interface The Google Auto screen is divided into two areas; Upper and Lower Selections. Use the "Upper Selections" and "Lower Selections" buttons to switch between two selections, and then use “Previous item” and “Next item” and “OK” button to make a selection. Screen Saver Mode In some cases, listening to music or an audio book, you may want to turn off the screen. It will be less distracting. The screen can be turned off by pressing the "Off screen" button.
4. VTHUDpro Product Diagram 4.1. The main body ① 3.
④ Reset hole ⑤ USB socket ⑥ Switch on/off ⑦ Base ⑧ Image combiner (Combiner) ⑨ MIC 4.2.
How to Separate the Base 4.
① Upper Selections(For Android Auto) ② Function / Menus switch (long press enter menu) ③ OK ④ Previous item ⑤ Voice assistant ⑥ Lower Selections(For Android Auto) ⑦ Screen on and off ⑧ Next item ⑨ Buckle 4.
5. Technical Specification Rated working voltage 12V-24V Limit working voltage 8-27V USB output 500ma Working temperature 0-75 degrees TFT screen resolution 480*240 Projection size 15-inch virtual image two meters away SNR >60dB Degree of distortion <0.1% Frequency response 20Hz-15Khz Left and right channel separation 〉60dB Bluetooth version Version4.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
- 17 -
For technical support contact: Call 888-941-3060 Email info@visiontechamerica.com Visit www.VisionTechAmerica.