Use and Care Manual

INSTRUCTION OF PASSWORD GUN

CABINET

Tip: Do not leave the emergency key inside the safe !

SCHEMATIC DIAGRAM PARTS LIST

ACTUAL MODEL MAY VARY

PRODUCT FUNCTION DESCRIPTION:

1: The yellow light is the input digital indicator; the green is also the door open indicator; the red light is the under

voltage indicator

2: * / # key is the confirmation key.

3: Two sets of passwords (factory personal password 159, blank management code can be set.)

5: The quiescent current is less than 10UA.

6: The dynamic current is 360MA

7: Under voltage is 4.5V (+/-0.2V)

8: Normal working voltage: 4-7V

9: This system has a password recording function.

GETTING STARTED

1. Push the battery box cover down.

WARNING

Tip Over Hazard

•

A child or adult can tip the safe and be killed or seriously injured.

•

Serious injury may occur to children and adults if not secured before installation.

•

Children should not play with or around the safe at any time.

PAGE 1
INSTRUCTION OF PASSWORD GUN CABINET Tip: Do not leave the emergency key inside the safe ! SCHEMATIC DIAGRAM PARTS LIST ACTUAL MODEL MAY VARY WARNING Tip Over Hazard • A child or adult can tip the safe and be killed or seriously injured. • Serious injury may occur to children and adults if not secured before installation. • Children should not play with or around the safe at any time.
PAGE 2
. Expose the emergency key channel, 3. Insert the emergency key into the key channel, push and turn counterclockwise. 4. Turn the handle clockwise to open the safe. 5. Continue to install the battery INSTALL BATTERIES 1. Open the battery box cover. 2. Insert 4 AA batteries and restore the battery cover. (Warning: Do not use rechargeable batteries) 3. Continue to the next step THIS ELECTRONIC LOCK COMES WITH TWO SETS OF PASSWORDS 1. E-factory personal password (159). 2.
PAGE 3
1·Drill the appropriate size holes for the anchors you are using 2·Carefully press the anchor into the holes at this time 3· Mount the safe by running screws from inside of the safe and securing to anchors; ensure the safe is mounted securely Floor Mounting 4·Use proper drill tools depending on the type of floor you are mounting the safe (wood, tile, or concrete) 5· Measure the location of the pre-set drill holes; mark their exact position onto the floor 6·Drill the appropriate size holes for the anchors yo