Installation Guide

AUTHORIZATION TO MARK
Applicant: Manufacturer:
Address: Address:
Country: Country:
4004475 1
Standard(s):
Product:
Models:
EF-11A, EF-11B, EF-11C, EF-11D, EF-12A, EF-12B, EF-12C, EF-12D, EF-14A, EF-14B, EF-15A, EF-
15B, EF-15C, EF-15D, EF-30A, EF-30B, EF-30C, EF-30D, EF-30BF, EF-36, EF-48, EF-30BFGPLED,
WF-1336, WF-1340, WF-1350, WF-1360, WF1436, WF-1370, WF-1395, WF-48S, WF-36S, WF-32S,
WF-40S, WF-26SGPLED, WF-36SGPLED, WF-36SLGLED, 86271, 86272, 80001, 80002, 80008,
80026, WF-48SLGGPLED
WF-40SGPLED, WF-48SGPLED, ZCR 3824, ZCR 3830, ZCR 3840, IF-36FSB, IF-40FSB,
IF-50FSB, IF-60FSB, IF-70FSB, IF-1336TCL, IF-1340TCL, IF-1350TCL, IF-1360TCL,
IF-1370TCL, EF-18, EF-23, EF-26, EF-28, EF-34, IF-1330TCL, IF-1380TCL, IF-1390TCL, IF-13100TCL,
IF-1370, IF-1380, IF-1390, IF-13100, IF-1336, IF-1340, IF-1350, IF-1360, 86273, WLGN8740, 80004,
86274, 80047, 80048, 80013, 80019, IF-36, IF-40, IF-42, IF-50, IF-60, IF-70, IF-72, IF-74, IF-80, IF-90, IF-
100
Control Number:
4004475
Authorized by:
for L. Matthew Snyder, Certification Manager
This document supersedes all previous Authorizations to Mark for the noted Report Number.
This Authorization to Mark is for the exclusive use of Intertek's Client and is provided pursuant to the Certification agreement between Intertek and its Client. Intertek's responsibility and liability are
limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned
by the use of this Authorization to Mark. Only the Client is authorized to permit copying or distribution of this Authorization to Mark and then only in its entirety. Use of Intertek’s Certification mark is
restricted to the conditions laid out in the agreement and in this Authorization to Mark. Any further use of the Intertek name for the sale or advertisement of the tested material, product or service must
first be approved in writing by Intertek. Initial Factory Assessments and Follow up Services are for the purpose of assuring appropriate usage of the Certification mark in accordance with the
agreement, they are not for the purposes of production quality control and do not relieve the Client of their obligations in this respect.
Intertek Testing Services NA Inc.
545 East Algonquin Road, Arlington Heights, IL 60005
Telephone [phone] or 847-439-5667 Fax [phone]
Fixed And Location-Dedicated Electric Room Heaters [UL 2021:2015 Ed.4+R:14Dec2016]
Electric Air-Heaters (R2018) [CSA C22.2#46:2013 Ed.9]
Electric Fireplace
Party Authorized To Apply Mark:
Same as Manufacturer
Report Issuing Office:
Intertek Testing Services Shanghai Limited
China
China
NINGBO GENGMEI ELECTRIC
APPLIANCE TECH CO., LTD.
NINGBO GENGMEI ELECTRIC
APPLIANCE TECH CO., LTD.
Guangxi Industrial Estate, Yinjiang
Town, Haishu District, Ningbo
Guangxi Industrial Estate, Yinjiang Town,
Haishu District, Ningbo
This authorizes the application of the Certification Mark(s) shown below to the models described in the Product(s)
Covered section when made in accordance with the conditions set forth in the Certification Agreement and Listing
Report. This authorization also applies to multiple listee model(s) identified on the correlation page of the Listing
Report.
This document is the property of Intertek Testing Services and is not transferable. The certification mark(s) may be
applied only at the location of the Party Authorized To Apply Mark.
Page 1 of 1 ATM for Report 190402458SHA-001
ATM Issued: 12-May-2023
ED 16.3.15 (1-Jul-2022) Mandatory