Quick Start Guide

BY-M17R
On-camera condenser shotgun microphone
Instruction Manual
Thanks for choosing BOYA!
The BY-M17R is a limited-budget super-cardioid shotgun
microphone, which is specially designed for DSLRs, camcorders
and audio recorders. With it's good quality and super-cardioid
polar pattern, it could be widely used in daily recordings, such
as video shooting, vlogging, podcasting and more.
Features with a standard 1/4" mount thread, it allows BY-M17R to
be mounted on any standard cold shoe mount. With integrated
shock mount, it could eectively reduce vibration during any
shooting environment. Constructed by solid ABS, the BY-M17R is
of super light-weight, but yet it picks up crystal clear sound.
• BY-M17R microphone
• Foam windshield
• User manual
• Warranty card
PACKAGE CONTENTS
- On-camera condenser microphone
- Super-cardioid polar pattern
- Capture crisp and clean sound
- Easy to use
- Powered by one AA battery
- Standard 1/4" mounting thread
- 3.5mm gold-plated audio cable
- Foam windshield included
- Solid ABS construction
1. Slide the battery compartment lid in the direction of the arrow.
2. Insert one piece of AA battery. Make sure that the + and – signs
match the symbols in the compartment.
3. Replace the battery compartment lid.
1. Loosen the locking knob, then slide your microphone’s
shoe mount onto your camera.
2. Tighten the locking knob to secure your microphone.
3. Connect the 3.5mm audio cable to your camera.
1. Turn on your camera.
2. Turn the power switch to ON, the LED indicator stays blue.
3. Put the microphone towards the sound source.
4. Turn o the microphone after recording nished.
1. Tighten the microphone to the 1/4" mounting thread on
a tripod or tripod plate. Please refer to the instructions that
camera with your tripod for more information.
2. Connect the 3.5 mm audio cable to your camera.
1. Power indicator
2. Power switch
3. Cold shoe mount
4. Foam windscreen
5. Battery compartment
6. 1/4" mounting thread
7. Integrated shock mount
8. 3.5mm TRS audio output jack
INTRODUCTION
FEATURES
INSTALL THE BATTERY
PRODUCT STRUCTURE
SETTING UP YOUR MICROPHONE
USING YOUR MICROPHONE
SPECIFICATION
To attach your microphone to a camera:
To attach your microphone to a tripod:
1/4" mounting threads
Acoustic Principle:
Polar Pattern:
Frequency Response:
Sensitivity:
Output Impedance:
S/N:
Output Connector:
Power Requirement:
Operating Time with Battery:
Net Weight:
Dimension:
Condenser Microphone
Super-cardioid
20-20,000Hz
-42±3dB (0dB=1V/Pa @ 1KHz)
50 Ohm
78dB and more
3.5mm TRS connector
One AA battery
50H
116.5g (4.11oz)
240*106*64mm (9.45*4.17*2.52")
www.boya-mic.com
SHENZHEN JIAYZ PHOTO INDUSTRIAL., LTD.
The BOYA logo is a trademark which is registered and owned by
Shenzhen Jiayz Photo Industrial., Ltd.
COPY RIGHT 2010-2020
TEL: [phone]
Email: [e-mail]
www.boya-mic.com / www.jiayz.com
1
4
5
8
2
7
6
3
品牌
技术要求：
1、表面无色差
2、无正负公差
3、包装标注尺寸为内尺寸
长丰型号
8
变更日期 变更担当变更内容版本修改名称
7
1 2
BOYA BY-M17R