Quick Start Guide

1
7 10
2 3 4
(8-10 inches)
20-25cm
BY-M1 Pro
6
8
7
Package Contents:
• One BY-M1 Pro lavalier microphone
• Foam windscreen
• Clothing clip
• Velcro
• Battery(LR44)
• Carrying case
• User manual
• Warranty card
Thanks for choosing BOYA!
The BY-M1 Pro is an universal lavalier microphone, which
compatible with smartphones, PC, cameras, audio recorders,
and other recording devices etc.
On it's compact body, there are a few special and useful
functions that distinguish BY-M1 Pro to other general
microphones in the market. With -10dB pad switch, it
eectively reduces unwanted plosive when the subject sound
is very loud and close to the microphone, make sure the
recording is always clear. With a 3/8" headphone jack on the
bottom, it allows users to monitoring sound in smartphone
mode.
In order to ensure you have a good experience, please read
the manual thoroughly and retain it for future reference.
Introduction
Main features
#
1
2
3
4
5
6
7
8
Item Description
Omni-directional
microphone
Picks up sound. The sound enters through the holes in the top
of the capsule.
Power pack
Provides power for the microphone for use with cameras and
other devices requiring a powered mic.
Camera setting
OFF setting
Smartphone setting
Turns the power on to the microphone. For use with cameras
and other devices requiring a powered mic.
Switch to OFF mode when you stop recording to save battery.
Switch to Smartphone mode to allow the BY-M1 Pro works on mobile
devices like smartphones, tablets and PC etc that with a 3.5mm input jack.
3.5 mm connector
0/-10dB setting
Earphone monitoring
Connects the microphone to the Smartphone, camera, camcorder, or
other recording device.
Switch to 0 / -10dB according to the recording environment.
In Smartphone mode, playback headphone monitoring is allowed.
With -10dB pad switch, it eectively reduce unwanted plosive when the
subject sound is very loud and close to the microphone.
Features
Attach the microphone to the front of your clothing
with the clothing clip, about 20-25cm (8-10 inches)
from your face.
1) Attach the microphone upside down to reduce
excessive breath noises and tonal inconsistencies
due to head movements.
2) It is recommended t o use the foam wind
screen at all times to avoid wind noise, even when
recording inside.
Anticlockwise rotating the microphone capsule until you see
the inside layout, and please remove the plastic sheet inside
to get the microphone ready for recording. After you nish
usage, pls put the plastic sheet back to protect the battery from
running away.
Mounting the microphone to your clothing
Battery power
Using the microphone
Attaching the microphone to the clothing
clip
• Insert the microphone into the plastic loop on the
clothing clip.
Using the microphone with a camera
1 Install battery in right polarities.
2 Attach the microphone to your clothing (see previous
instructions).
3 Move the switch on the power pack to the Camera (on)
setting.
4 Plug the 3.5 mm connector into the audio input jack of
your DSLR, Point and Shoot camera, or camcorder, and
begin lming.
Note
Not all cameras have a microphone input. Verify
this with your camera manufacturer. Many cameras
have headphone, remote control, and other ports
that look similar to a microphone input. Make sure
that you are using the correct one.
Using the microphone with a Smartphone
Caution
No need to install battery when using with
Smartphone.
5
Replacing the battery
1 Unscrew the two parts of the power pack and
separate the pieces.
2 Remove the old battery from its compartment in the
power pack.
3 Place the new battery, with the + and - oriented as
indicated, into the battery compartment in the
power pack. The + symbol is stamped inside the
compartment for reference.
Using the microphone with a laptop
1) BOYA BY-M1 Pro can only be used on laptops which
headphone and microphone are, the same jack.
2) No need to install battery
Note
1) When move switch on the power pack to the Camera
(on), make sure to install battery in right polarities.
2) No need to install battery when in smartphone mode.
3) Make sure set the switch rst, then connect microphone
with your equipment.
1 Attach the microphone to your clothing (see previous
instructions).
2 Move the switch on the power pack to the Smartphone.
3 Plug the 3.5 mm connector into the audio jack of your
laptop.
4 Open the audio app and begin recording.
6
Using the microphone with other devices
1 Install battery in right polarities.
2 Attach the microphone to your clothing (see previous
instructions).
3 Move the switch on the power pack to the Camera (on)
setting.
4 Plug the 3.5 mm connector into the audio input jack of
your device (audio recorder, amplier etc.), and begin
recording.
Note
8
Troubleshooting
Problem Solution
The microphone
does not turn on
The battery may be incorrectly oriented in the battery
compartment. Open the battery compartment and make sure the
battery is correctly installed.
The battery may be exhausted. Replace it with a new one. See the
Specications section for compatible replacements.
The battery terminals are dirty. Open the battery compartment and
clean the terminals with a cotton swab.
The battery
discharges too
quickly
The micro
phone is being left on (in the Camera position). Turn o
the microphone by switching to OFF to save battery when recording
stopped.
You are using the microphone in extremely hot or cold conditions
which drains it quickly.
Too much
ambience noise is
being picked up
When there are too many background noise, switch to -10dB to
reduce unwanted background noise.
9
Specications
Transducer Electret condenser
Polar pattern Omni-directional
Frequency range 65 Hz ~ 18 KHz
Signal/Noise 78 dB SPL
Sensitivity -30 dB +/- 3 dB / 0 dB=1V/Pa, 1 kHz
Output impedance 1000 Ohm or less
Battery type LR44 included (compatible with LR44, 357, and SR44)
Connector
Pad Switch
3.5mm (1/8”) 4-pole gold plug
0/-10dB
Weight
Dimensions
58g
6.0m
Specications
SHENZHEN JIAYZ PHOTO INDUSTRIAL., LTD.
The BOYA logo is a trademark which is registered and owned by
Shenzhen Jiayz Photo Industrial., Ltd.
COPY RIGHT 2010-2020
Email: [e-mail]
www.boya-mic.com / www.jiayz.com
• Clip-on Mic for Smartphones, DSLRs, camcorders, audio
recorders, PC etc.
• High-quality condenser, ideal for video use.
• Low handling noise.
• Includes lapel clip, LR44 battery, foam windscreen, 1/4” adapter.
• Play back headphone monitoring in smartphone mode.
• -10dB sound attenuation.
1 Attach the microphone to your clothing (see previous
instructions).
2 Move the switch on the power pack to the Smartphone.
3 Plug the 3.5 mm connector into the audio jack of your
smartphone.
4 Open the audio-only or video recording app and begin
recording.
Universal Lavalier Microphone
深圳市长丰影像器材有限公司
品牌
技术要求：
1、表面无色差
2、无正负公差
3、包装标注尺寸为内尺寸
子件名称 版本
材质
比例
审核
暂无
吴蒙蒙
2019-5-17
核准/日期 赵宏亮
单位1:1 mm
尺寸
子件编号
设计/日期
长丰型号
8
变更日期 变更担当变更内容版本修改名称
7
1 2
BY-M1 Pro说明书
BOYA BY-M1 Pro
85x120
1F0300300190
V00
105g双铜纸 骑马钉 12p
吴蒙蒙
长丰影像
2019-5-17