Quick Start Guide

① Long press the left earbud for 1.5s to decrease volume, long press
right earbud for 1.5s to increase volume.
tap
tap
Tap
Tap
True Wireless Earbuds!
Left/right earbuds will automatically turn on after taken out from
charging case
① Turn ON: long press left / right earbud for 2.5 seconds，left / right earbud
will turn on.
② Turn OFF: long press left / right earbud for 8 seconds，left / right earbud
will turn off.
battery power is too low
on your device and connect bluetooth named
“BY-AP1”
on your device and connect bluetooth named
“BY-AP1”
① Long press left/right earbuds for 12s under off state, the earbuds prompt
“Power On”, “Pairing”, “DuDuDuDu” in turn, the red light of earbuds steady
2.5s and then turn off, indicates the earbuds successfully restored to factory
setting.
② Place both earbuds back to the charging case, close the cover and take them
out after a short period, the earbuds will turn on, automatically pair into
binaural mode and re-search for pairing. (earnids red/blue light steady 2.5s,
then blue light flash every 0.5s)
5g (single earbud) , 32g (Charging case)
Q: The earbuds volume cannot be adjusted
device
device
④ Please keep the earbuds away from water and keep it dry
are in low power
Earbuds Resetting
Product Structure