Micro Portable LCD Projector USER’S MANUAL MAIN PAGE Downloaded From projector-manual.
CONTENTS Overview Features & Warnings ............................................................................. 1 Checking the Accessories Standard and Optional Accessories ....................................................... 2 Definitions of Keys and Indicators Remote Controller and Keys of Control Panel ...................................... 3 Definitions of Indicators and Definitions of key functions ................... 4 Setting Up Location for Setting Up ......................................
Overview Features !2.7kgs Micro-Portable projector. !High Brightness with high Contrast ratio, total power consumption 220 W. !A wide variety of External Connections available for D-Sub 15 pin, S-Video, RCA composite signal and DVI Input(XGA Type). !Good Compatibility:horizontal scanning frequency from 15 to 90KHz, and vertical scanning frequency from 43 to 85Hz , VGA to SXGA Signals. !Short projection distance for Big image size. Projection distance 1.33m〜8.33m with screen size from 40”to 200”.
Checking the Accessories Standard Accessories ! ! ! ! ! ! ! Projector Lens Cover Power Cord Remote Controller No.4 AAA Battery x 2 Audio Wire-Phone Jack S-Video Wire ! ! ! ! ! ! ! D-Sub 15pin Cable Audio Wire-RCA Jack DVI Interface connecting wire(XGA Type) Video Wire-RCA Jack PS/2 Mouse connecting wire User’s Manual Carrying bag for projector and accessories(XGA Type) XGA Type Optional Accessories !Spare Lamp !Sponge for air filter You can perchance these spare accessories from your dealer.
Definitions of Keys and Indicators Remote Controller Keys of Control Panel Downloaded From projector-manual.
Definitions of Indicators Normal Indicator Abnormal Indicator ◎Green Off On Off Standby Mode Off Off On Normal Working Mode Off ◎Orange Meaning ◎Red Alternate Flash per second Heat Dissipating Flash Off On Abnormal Fan(Heat Dissipating) Flash Off Off Abnormal Fan Off Off Off No Power Definitions of key functions Key Power Function (Under normal working mode) ! Press Power button to turn on the projector. ! Press Power button twice to shut down the projector.
Setting Up Locations for Setting Up ! Projector shall be placed on steady desktop or use specific tooling to hand on solid ceiling. ! Adjust projector so the lens is perpendicular to screen, otherwise, the image on screen will have trapezoidal shape. Projection Distance /Size Table Projection Size/inch Project Distance /m Max Zoom Project Distance/m Min Zoom 40” 1.33 1.67 50” 1.67 2.08 60” 2.00 2.50 100” 3.33 4.17 150 5.00 6.25 200” 6.67 8.33 Downloaded From projector-manual.
Zoom, Focus and Height Adjustment Focus , Magnitude Adjustment !When the image appears on the screen, use these functions to focus and adjust screen alignment. !Actual projected display size depends on the distance between the projector and the screen, as well as the magnitude of projector lens. !Focus adjustment:Turn the focusing ring of the lens, which is the outer ring at the lens in front side of projector. !Size adjustment:Turn the inner side zoom ring, increase when clockwise.
External Connections Connecting to PC ! Connect the D-Sub 15 pin cable from the VGA card of the computer into the VGA IN terminal of the projector . ! Mark sure that both parts have a good connection. ! Turn on projector first then computer. Downloaded From projector-manual.
Connecting to Video Signals !Connecting to video signal sources such as VTR , DVD or LD. !The method for connecting RCA jack AV wire is shown below !The method for connecting S-Video Wire is shown below Downloaded From projector-manual.
OSD (On Screen Display) Manu Display/Exit OSD Menu !Press MENU key to display the main menu. !The contents of main menu are different according to various input signals which are shown as the following: !Press EXIT key to Exit the main menu. Input signals of VGA or DVI(XGAType) Input signals of AV or S -VIDEO Image Quality Adjustment !After displaying main menu, press " # key to move Bar to “Picture ” !Press $ key to enter sub menu. !Press " # key to move Bar to the option which needs to be adjusted .
Advanced Setting Adjustment !After displaying OSD menu, press " # key to move the Bar to “Advanced ” !Press $ key to enter sub menu. !Press " # key to move Bar to the option which needs to be adjusted . !Press $ % key to set the value and press MENU key to return to main menu. !Press EXIT key to exit the menu and save the setting.
Advanced Scale Adjustment (Digital Zoom) !After displaying OSD menu, press " # key to move the Bar to “Adv. Scale ”. !Press $ key to enter sub menu. !Press " # key to move Bar to the option which needs to be adjusted. !Press $ % key to set the value and press MENU key to return to main menu. !Press EXIT key to exit the menu and save the value.
Options !After display Main-menu,press " # key to move Bar to “Options ” !Press $ key to enter sub-Menu. !Press " # key to move Bar to the option which needs to be adjusted. !Press $ % key to set value and press MENU key to return to main menu. !Press EXIT key to exit the menu and save the value. !The option to be adjusted as the following: Input signals of VGA or DVI(XGAType) Input signals of AV or S-VIDEO Options The instruction OSD To select OSD position on screen.
Audio Adjustment !After displaying main menu,press " # key to move Bar to “Audio ” . !Press $ key to enter sub menu. !Press" # key to move Bar to the option which is about adjusted. !Press $ % key to set the value and press MENU key to return to main menu. !Press EXIT key to hide the menu and save the set value.
Maintenance Handling of Abnormality Abnormality of Indicators !When Red indicator is on, it means the heat dissipation or fan is at fault, please contact with your dealer. !If there is No indicator on, please check whether the power cord connect properly. If it still doesn’t work, please contact with your dealer.
Replacing Main Lamp Replacing Lamp Module !When the red indicator is flashing and the lamp doesn’t lighting up, the lamp source might abnormal or burn out. !When the projection image is too dark, or the projection image is unstable and flashing , please change the lamp. !Please use specific lamp module provided by your local dealer. !Turn off projector and unplug power cord. !Loosen the 2 screws of the cap of lamp module. !You need to find a special star type screwdriver.
Appendix Compatible Modes Resolution V. Frequency H. Frequency Resolution V. Frequency H. Frequency 720 × 420 70Hz 31.5KHz 1152 ×864 60Hz 54.3KHz 640 × 350 70Hz 31.5KHz 1152 ×864 70Hz 63.9KHz 720 × 400 85Hz 37.9KHz 1152 ×864 70Hz 64KHz 640 × 350 85Hz 37.9KHz 1152 ×864 75Hz 67.5KHz 640 × 480 60Hz 31.5KHz 1152 ×864 85Hz 77.1KHz 640 × 480 67Hz 35KHz 1280 ×960 60Hz 60KHz 640 × 480 72Hz 37.9KHz 1280 ×960 75Hz 75.93KHz 640 × 480 75Hz 37.5KHz 1280 ×960 85Hz 85.