PI7 Wireless Headphones
ENGLISH Welcome to Bowers & Wilkins and PI77 Thank you for choosing Bowers & Wilkins. When John Bowers first established our company, he did so in the belief that imaginative design, innovative engineering and advanced technology were keys that could unlock the enjoyment of audio in the home.
PI7 Headphones with ear tips (M) Charge Case USB-C Charging and USB-C to 3.5mm Audio Cable Ear Tips (S/L) Literature Pack 2. Getting to know your PI7 2.1 Switching Headphones On and Off Switching On/OFF The PI7 does not have a power control and the power management is automatic. Your PI7 ear buds will charge when placed into the charging case and will be ready to use when they are removed from the charing case.
Voice Assistance can be activated by long pressing the right earbud for 1 second. 3.3 Ambient Pass-Through PI7 features ambient pass-through which lets some external noise from the surrounding environment, such as safety announcements or conversations, to be heard without taking the headphones off. Ambient pass-through can ONLY be enabled/disabled through Bowers & Wilkins headphone App. The level of ambient passthrough can be further customised to suite your needs through the App. 3.
(Lid open) Ear bud charge > 40% (power on) Ear bud charge >20%, <40% (power on) Ear bud charge <20% Please see Diagram 3.1. (blinking) Ear bud factory Reset 6. Bluetooth Connectivity (Solid) Hardware Reset/System Crash (blinking) Pairing Mode Enabled Users can check the case battery level by pressing the outside button 1 time, 2 time to see the earbuds battery level when both earbuds are inside the case. 6.
ENGLISH 6.3 Setting up Headphones with the App a The Bowers & Wilkins Headphones app provides extended setup and adjustments to features such as Adaptive Noise Cancellation, Ambient Pass-Through, and Wear Sensors. The app also provides further customisations such as voice prompt, level of ambient pass-through, connection management ,and headphone software updates. The app is available as a free download on iOS and Android devices. To add your headphones: 1.
ENGLISH 8. Media Streaming 8.1 Connecting your Case to media source with the supplied USB type-C-to-3.5mm Cable for media streaming Please see Diagram 6. Steps 1. Connect the supplied cable to the case and the source device. 2. Your PI7 will automatically start streaming. 8.2 Connecting your Case to media source with the supplied USB type-C-to-C Cable for media streaming Steps 1. Connect the supplied cable to the case and the source device. 2. Your PI7 will automatically start streaming.
ENGLISH Hold the button for 3 seconds/ Flashing blue light. Connect the case to the source. Secondary/Subsequent HP in pairing mode. 12. Specifications Technical Features Solid blue light once paired. Press the button 1X to START, 2X to STOP. Diagram 7 Secondary/Subsequent Headphone Streaming 9 . Reset/Troubleshooting Bluetooth Codec AptX AptX AptX AptX AAC SBC Bluetooth Profiles A2DP v1.3.1 AVRCP v1.6.1 HFP v1.7.1 HSP v1.2 BLE GATT (Generic Attribute Profile) 9.