PX7 Wireless Headphones
ENGLISH Welcome to Bowers & Wilkins and PX7 Thank you for choosing Bowers & Wilkins. When John Bowers first established our company, he did so in the belief that imaginative design, innovative engineering and advanced technology were keys that could unlock the enjoyment of audio in the home. His belief is one that we continue to share and inspires every product we design, tailored for new audio experiences outside of the home.
ENGLISH 1. PX7 Carton Contents PX7 headphones Storage case USB-C charging cable 3.5mm audio cable Document pack 5s 2. Getting to know your PX7 2.1 Switching Headphones On and Off Diagram 1 illustrates power switch functionality. Diagram 1 Power switch functionality Switching On The Power Switch is located on the right earpiece. Slide the Power Switch up to the middle position.
3.1 Adaptive Noise Cancellation Noise cancellation is a series of advanced technologies that aids in removing undesired noise from the surrounding environment. PX7 features our latest innovations in adaptive noise cancellation, this includes intelligent sensing that adapts noise cancellation and tuning best suited to your surrounding environment. As your surroundings change, noise cancellation will auto adapt to complement your new environment.
ENGLISH 4. Battery Charging and Power Saving Your PX7 comes with the battery partially charged may be used immediately. For best practice we recommend to fully charge the headphones before first use. Please allow up to 3 hours for full charge. The headphones can be used while charging. To charge: 1. Please use the supplied charging cable and connect the USB-A plug to a wall charger or a powered computer USB-A socket. 2.
.1 Pairing PX7 is designed to stream media wirelessly from Bluetooth audio devices, such as smartphones, tablets or personal computers. To do so, the headphone and device (source) must first be paired. 1. The first time you switch on your headphones, Bluetooth pairing mode will be enabled, the indicator will flash blue.
9. Care & Maintenance 10. Support In addition to Bluetooth, your PX7 can also connect to audio sources using the supplied 3.5mm audio or USB cables. 9.1 Storing Your PX7 Should you require further help or advice regarding your PX7 please visit the Headphones support site here www.bowerswilkins.com/support. Taking care of your PX7 will ensure they continue to deliver the best performance and experience. 7.1 Connecting with the 3.5mm Audio Cable The 3.
Wearing Style Bluetooth Wireless Over-Ear Headphones Technical Features Adaptive Noise Cancellation Ambient Pass-Through Wear-Detection Sensor Bluetooth® audio - Bluetooth 5.0 with aptX™ Adaptive USB-C charging & audio interface 3.5mm auxiliary audio interface Bluetooth Codecs aptX™ Adaptive aptX™ HD aptX™ Classic AAC SBC Bluetooth Profiles A2DP v1.3.1 AVRCP v1.6.1 HFP v1.7.1 HSP v1.2 BLE GATT (Generic Attribute Profile) Drive Units 2 x ø 43.
PX? Safety & Warranty Bowers & Wilkins
English Important safety instructions 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Read these instructions. Keep these instructions. Heed all warnings. Follow all 1nstruct1ons. Clean only with a dry cloth. Only use attachments/accessories specified by the manufacturer. Ensure that the headphones are not worn wrth, or kept in the immediate vicinity (closer that 10cm) of, a pacemaker. Do not insert headphone Jack plugs into electnc power sockets. PJways supeNise children using these headphones.
Terms and Conditions This warranty: 1 is valid only for products purchased from an authorised Bowers & Wilkins retailer or dealer. 2 is valid from the date of purchase for a period of five years for passive loudspeakers and two years for powered loudSP88kers. electronics and headphones. except that exclusions apply In certain countries In line with national law. Please consult the Bowers & Wilkins distnbutor In your country for detailed 1nformat1on. 3 is limited to the repair of the equipment.
Australia Warranty SubJect to the following t8fms, Bowers & Wilkins Australia Ply Ltd will repair or replace any part of any eligible Bowers & Wilkins product that is defective w1th1n the warranty period indicated 1n the table below or refund you the cost of the replacement. The benefits to a consumer grven by this warranty are 1n addition to other rights and remedies of the consumer under a law in relation to the goods or services to which the warranty relates.
r X -----------------------, I 1 Make: 1 Model Name/Number: Bowers & Wilkins Serial Number: Date of Purchase: 11 L Where Purchased: __________________________ J
Additional Countries USA FEDEkA.L COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has t,een tested and found to comply wnh the hrrnts for a Class B digital device. pursuant to part 15 of the FCC Rules. These limns are designed to provide reasonable protection ag;iInst harmful interference in a residential ,nstallat,on. This equ,pmeot generates. uses and can radiate radio frequency energy and. 11 not installed and used ,n accordance with the ,nstruct,ons.
EU Declaration of Conformity English Bowers & Wilkins hereby declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU and all other applicable EU directive requirements. The complete Declaration of Conformity can be found at www.bowers-wilk1ns.com/compliance.
B&W Group Ltd.