PI4 Wireless Headphones
ENGLISH Welcome to Bowers & Wilkins and PI4 Thank you for choosing Bowers & Wilkins. When John Bowers first established our company, he did so in the belief that imaginative design, innovative engineering and advanced technology were keys that could unlock the enjoyment of audio in the home. His belief is one that we continue to share and inspires every product we design, tailored for new audio experiences outside of the home.
PI4 headphones Storage case USB-C charging cable Ear tips (small, medium and large) Ear stabilisers (small, medium and large) Document pack ENGLISH L 1. PI4 Carton Contents 2. Getting to know your PI4 2.1 Switching Headphones On and Off Diagram 1 illustrates Power button functionality. Switching On The Power button is located on the left control unit. Press and hold the Power button for 2 seconds.
3.1 Adaptive Noise Cancellation Noise cancellation is a series of advanced technologies that aids in removing undesired noise from the surrounding environment. PI4 features our latest innovations in adaptive noise cancellation, this includes intelligent sensing that adapts noise cancellation and tuning best suited to your surrounding environment. As your surroundings change, noise cancellation will auto adapt to complement your new environment.
R ENGLISH 4. Battery Charging and Power Saving Your PI4 comes with the battery partially charged may be used immediately. For best practice we recommend to fully charge the headphones before first use. Please allow up to 3 hours for full charge. The headphones can be used while charging. To charge: 1. Please use the supplied charging cable and connect the USB-A plug to a wall charger or a powered computer USB-A socket. 2.
.1 Pairing PI4 is designed to stream media wirelessly from Bluetooth audio devices, such as smartphones, tablets or personal computers. To do so, the headphone and device (source) must first be paired, see Diagram 6. 6.4 Setting Up Headphones with the App 6.5 Headphone Software Updates The Bowers & Wilkins Headphones app provides extended setup. The app also provides further customisations such as voice prompt, standby time, connection management and headphone software updates.
. Power Cycle and Reset 8. Care & Maintenance 7.1 Power Cycle 8.1 Storing Your PI4 You can power cycle your PI4, simultaneously hold the Volume + and Volume – buttons for 10 seconds until the indicator LED extinguishes, let go when the indicator lights up again. Rebooting your headphones will not reset their internal settings or clear the paired device history. Taking care of your PI4 will ensure they continue to deliver the best performance and experience.
Wearing Style Bluetooth Wireless In-Ear Headphone Technical Features Bluetooth Codecs Adaptive Noise Cancellation Ambient Pass-Through Magnetic Clip Sensor Bluetooth 5.0 with AptX-Adaptive technology USB-C charging and audio interface Bluetooth Profiles A2DP v1.3.1 AVRCP v1.6.1 HFP v1.7.1 HSP v1.2 BLE GATT (Generic Attribute Profile) Drive Units 2 x ø14.