Precision Spectra™ Remote Control Handbook, 90668562-01, Rev C Delete a Program Deleting a Program will completely remove the Program from the Stimulator. Once the Program is deleted, it cannot be recovered. Programs that were configured by your healthcare provider cannot be deleted and do not appear on the “Delete” Program list. Only Programs that were created using the “Copy To…” feature can be deleted.
Precision Spectra™ Remote Control Handbook, 90668562-01, Rev C Programs 1 Change Program 3 1 Delete Delete Program3 Delete? Save 3 Program3 Restore to Clinic Settings Yes Copy to ... No Delete Back Back Select 2 Select 3 Navigate to Delete and press . Navigate to the Program you wish to delete and press . Back Select 4 Navigate to Yes to confirm or No to cancel, then press .
Precision Spectra™ Remote Control Handbook, 90668562-01, Rev C This page intentionally left blank.
Configuring Stimulation Areas What is a Stimulation Area? ......................................36 Change a Stimulation Area Parameter .......................37 Save and Restore an Area in a Program .....................
Precision Spectra™ Remote Control Handbook, 90668562-01, Rev C What is a Stimulation Area? A Stimulation Area is the building block of a Program P . Each Program can include settings for up to 4 Stimulation Areas. Each Stimulation Area is identified by a letter and a name, such as A B ... “Area A”. These Stimulation Areas control parameters that can affect your stimulation therapy. These parameters are Amplitude , Pulse Width , and Rate .
Precision Spectra™ Remote Control Handbook, 90668562-01, Rev C Change a Stimulation Area Parameter Main Menu P 1 A Area A 1 Stimulation Areas Programs A Area A Amplitude Stimulation Areas B C D Area B Pulse Width Area C Rate System Settings Back Select 1 From the Main Menu press to navigate to Stimulation Areas , then press to select it. Area D Back Select 2 Navigate to the Area that you want to adjust and press .
Precision Spectra™ Remote Control Handbook, 90668562-01, Rev C A 1 Area A 1 Stimulation Areas Amplitude A Area A Pulse Width B C D Area B A 1 Amplitude Area A Rate 4.6 mA Back 4 Press the and buttons to decrease and increase the value for the selected parameter. Page 38 Back Select Area C Area D Back Select 5 To change another parameter, press the left Navigation button to return to the Area parameter menu. Repeat steps 3 - 4.
Precision Spectra™ Remote Control Handbook, 90668562-01, Rev C Note 1 Increasing the values for these parameters, , may especially Rate significantly increase the energy required for stimulation. This may lead to longer or more frequent recharging of the Stimulator. Program 1 52.1% Main Menu 6 When all desired changes have been made, press repeatedly until you return to the Home Screen.
Precision Spectra™ Remote Control Handbook, 90668562-01, Rev C Save and Restore an Area in a Program To save any Area parameter changes so that they are the default parameters, you must save the Program P . This will save all changes to any Area within that Program. You cannot save the changes for each individual Area independently of changes for other Areas in the same Program. See Save a Program page 26.