Precision Spectra™ Remote Control Handbook, 90668562-01, Rev C Refer to the Precision Spectra™ System Information for Patients manual for additional information on your Spinal Cord Stimulation System, such as Indications for Use, contraindications, warnings, precautions, adverse effects, storage and handling, device disposal, glossary, information on contacting Boston Scientific, FCC rules, and clinical studies supporting the clinical use of the neurostimulation system.
Precision Spectra™ Remote Control Handbook, 90668562-01, Rev C Table of Contents Introduction to the Precision Spectra™ Remote Control 6 Using the Remote Control 11 How To Use Programs 19 Configuring Stimulation Areas 35 About System Settings 41 Reminders and Messages 47 Troubleshooting 55 Page 4
Precision Spectra™ Remote Control Handbook, 90668562-01, Rev C This manual has been color-coded to help you use the Precision Spectra Remote Control while referencing the manual.
Precision Spectra™ Remote Control Handbook, 90668562-01, Rev C Introduction to the Precision Spectra™ Remote Control The Precision Spectra Remote Control (RC) is a handheld device that allows you to communicate with and control your Precision Spectra Stimulator. Designed for ease of use, the RC puts you in control of your stimulation therapy.
Precision Spectra™ Remote Control Handbook, 90668562-01, Rev C Remote Control Buttons Buttons are located on the face and sides of the RC as shown in the picture. Home On the right-hand side of the RC you will find the Lock/Unlock Programs button . On the left hand side you will find the HOME button and Programs button . Lock / Unlock P n On the face of the RC you will find the Stimulation buttons closest to the screen. The Stimulation buttons include the Stimulation ON/OFF button and the and buttons.
Precision Spectra™ Remote Control Handbook, 90668562-01, Rev C Remote Control Screen The RC screen displays menus, icons, status messages, error messages, and other information. When the RC is not in use (for example, the buttons are not being pressed), the screen automatically darkens after approximately 1 minute to preserve the RC’s battery power. The screen lights up when the RC is unlocked and remains on while the RC is being used.
Precision Spectra™ Remote Control Handbook, 90668562-01, Rev C Home Screen The Home screen displays the number and name of the Program currently running, as well as information about the level of stimulation strength. Stimulation strength is displayed both graphically and as a percentage value of the maximum limit. Icons at the top of the Home screen indicate the charge level of the Stimulator battery and the RC battery , and whether stimulation is ON or OFF .
Precision Spectra™ Remote Control Handbook, 90668562-01, Rev C When you press the Stimulation ON/OFF button , a large icon is displayed in the center of the screen to indicate on/off status. After a few seconds the display will return to the Home Screen.
Using the Remote Control Quick Start Guide .....................................................12 Turn Stimulation On/Off ............................................14 Adjust Stimulation Strength ......................................15 Recharging the Remote Control ................................16 Accessories ...............................................................
Precision Spectra™ Remote Control Handbook, 90668562-01, Rev C Quick Start Guide 1 Stimulation Release Side Button to Unlock 1 Unlock Page 12 ON Program 1 52.
Precision Spectra™ Remote Control Handbook, 90668562-01, Rev C Main Menu P Programs Stimulation Areas System Settings Stimulation OFF Back 4 Stop stimulation Select 5 Main Menu 6 Lock USING Page 13
Precision Spectra™ Remote Control Handbook, 90668562-01, Rev C Turn Stimulation On/Off Note Stimulation will not automatically turn off when the RC is locked or when the screen darkens to preserve power in the RC battery. Page 14 Stimulation can be turned on and off by pressing the Stimulation ON/OFF button . To turn stimulation on, you must unlock the RC first; then, press the Stimulation ON/ OFF button. To turn stimulation off, press the Stimulation ON/OFF button again.
Precision Spectra™ Remote Control Handbook, 90668562-01, Rev C Adjust Stimulation Strength To DECREASE stimulation, press To INCREASE stimulation, press P 1 Program 1 52.1% Main Menu Stimulation strength can be adjusted (after the RC is unlocked) by pressing the and buttons from the Home Screen. This will decrease or increase the stimulation strength of the Program currently running.
Precision Spectra™ Remote Control Handbook, 90668562-01, Rev C Recharging the Remote Control The RC displays messages reminding you to recharge the RC if the battery power is low. Charge Remote Now Page 16 Charging Remote Recharge the RC battery by connecting the RC to the USB Power Supply provided with the RC. Connect the power plug end of the USB Power Supply to a power outlet.
Precision Spectra™ Remote Control Handbook, 90668562-01, Rev C Accessories The following accessories are provided with the RC: Remote Control Silicone Case - The RC Silicone Case allows you to customize your RC. You can access all the buttons, the USB port, and see the screen while the device is in the Silicone Case. The side buttons that are covered by the Silicone Case are still available for use.
Precision Spectra™ Remote Control Handbook, 90668562-01, Rev C USB Power Supply - The USB Power Supply is used to recharge the RC battery. Connect the USB connector on the Power Supply to the RC. Then, find a convenient electrical outlet that will not expose the RC or Power Supply parts to water or direct heat. Connect the power plug on the Power Supply to a power outlet.The USB port on the RC is designed to accept a standard 5V Mini-B USB power supply.
How To Use Programs What Is a Program? ..................................................20 Accessing Programs ..................................................22 Overview of the Programs Menu ...............................23 Change to a Different Program .................................24 Save a Program .........................................................26 Restore a Program ....................................................28 Copy a Program .......................................................
Precision Spectra™ Remote Control Handbook, 90668562-01, Rev C What Is a Program? A Stimulation Program P is a group of configured settings that produce the stimulation to help you manage your pain. One or more Programs were configured by your healthcare provider (for example, at the clinic) after consideration of your pain management needs and preferences. Whenever you are using your Stimulator, one of these Programs is active, and stimulation is delivered according to the configured settings.
Precision Spectra™ Remote Control Handbook, 90668562-01, Rev C Each Program P can include settings for one or more Stimulation Areas These Stimulation Areas control additional parameters that can affect your stimulation therapy. For more information about Stimulation Areas, go to What is a Stimulation Area? page 36. The image to the right illustrates the relationship between Programs and Areas.
Precision Spectra™ Remote Control Handbook, 90668562-01, Rev C Accessing Programs Note After entering the Main Menu the , button can also be pressed to make a selection. Page 22 If your healthcare provider has configured Programs that can be changed, there are two ways to view the Programs menu: Press the Programs button on the left side of the RC. P 1 Change Program 1 2 3 Program 1 Program 2 Program 3 Back Select From the Main Menu , select Programs P by pressing .
Precision Spectra™ Remote Control Handbook, 90668562-01, Rev C Overview of the Programs Menu If your healthcare provider has configured Programs that can be changed, you can do any of the following operations: • Turn Stimulation ON/OFF currently running • Change • Save and adjust stimulation strength for the Program the currently running Program to a different Program (if available) any changes that you make to a Program • Restore a Program to the settings that your healthcare provider last configured f
Precision Spectra™ Remote Control Handbook, 90668562-01, Rev C Change to a Different Program 1 Main Menu 1 P Program 1 Change Program Stimulation Areas Save System Settings Restore to Clinic Settings Copy to ... 52.1% Delete Main Menu 1 From the Home Screen, press to display the Main Menu . Page 24 Programs Programs Back Back Select 2 Press again to enter the Programs menu P . Select 3 Press again to enter the Change Program menu .
