DRC GATEWAY DRC Gateway INSTRUCTION MANUAL VERSION 1.
DRC GATEWAY VISIT OUR WEBSITE FOR MORE INFORMATION. WWW.BOSSPAC.COM BOSSPAC ENGINEERING TECHNOLOGY, CALGARY HEAD OFFICE PHONE: (403) 216-1226 FAX: (403) 216-5557 E-MAIL: INFO@BOSSPAC.
DRC GATEWAY Introduction This manual provides basic information on how to commission or join a border router to any device: Commission a Border Router onto an existing network Joining a Border Router onto a network Required Tools: Computer (Run on Windows) DRC Gateway 10 to 24V Power Supply 915 MHz Antenna Ethernet Cable o Physical connection to Personal Internet router.
DRC GATEWAY 1. Commission/Joining Border Router to a network 1 Installation The DRC Gateway must be installed by a professional or certified technician conversant with the certification requirements of the installation site. The DRC Gateway requires a voltage between 10 VDC and 24 VDC capable of supplying up to 2A. Unless otherwise specified the DRC Gateway ships with a 3 dBi antenna (EA002058). The DRC Gateway is compatible with the following antennas.
DRC GATEWAY Figure 2 - Connect to the 915 MHz Antenna to Border Router (Figure 3) - Power on/ Plug in the power Supply Figure 3 2.2 SSH to Border Router - On your laptop open Command prompt On command prompt type “ssh pi@###.###.##.
DRC GATEWAY 2.3 Joining, Commissioning and Starting a Network 2.3.1 2.3.2 2.3.
DRC GATEWAY FCC & IC Statements FCC Class B Part 15 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by BossPac Engineering Technology Inc. may void the user’s authority to operate the equipment.
DRC GATEWAY For further Technical Assistance Email support@bosspac.