®Powmascables BOSSCOM DAB/FM Tuner Compatible with B&O Remote Controls User Manual ®Powmascables
®Powmascables Everyday control with Beo4, Beo5, Beo6 Everyday control with Beolink 1000 Special commands, used only by initial installation Special commands, used by initial installation *1 Not all Bang & Olufsen equipment responds to numeric commands. Using the Direct Mode option is recommended.
®Powmascables List of Contents Getting started ........................................................................................................ page 5 Direct or CableLink mode ........................................................................................ page 5 Factory settings ....................................................................................................... page 5 Installation ................................................................................
®Powmascables BOSSCOM DAB/FM is equipped with a 7 pin DIN Data Link cable for connection to Bang & Olufsen equipment. Thus an adaptor cable is required for connection to equipment not having a DIN input socket. See below examples and the Option Programming section page 8.
®Powmascables Getting Started This BOSSCOM DAB/FM tuner has been designed for operation in a Bang & Olufsen remote control system allowing full control with a Bang & Olufsen remote control terminal either directly or via connection to Bang & Olufsen equipment. Thus the tuner is Beolink compatible. Direct Mode or CableLink Mode The BOSSCOM DAB/FM tuner is connected to Bang & Olufsen equipment via the 7-pin DIN cable with or without adaptor, and through option programming it may be controlled as follows: 1.
®Powmascables Installation 1) 2) 3) 4) 5) 6) 7) 8) Connect power supply. Connect external antenna if required. Turn the power switch on, located on the cabinet. Select option and complete option programming, if required. Connect the tuner to the correct input socket on the Bang & Olufsen equipment. Select the corresponding source on the remote control terminal. Turn on the tuner manually, if it is not in the automatic power up mode. Select and program your favorite stations.
®Powmascables Antenna Connection BOSSCOM DAB/FM tuner may be connected to any antenna designed for FM and the DAB reception, if the supplied one is not sufficient. o o o If the FM signal strength is not sufficient the reception will be noisy. If the DAB signal strength is not sufficient the reception is varying from disturbing ”bubbles” to complete quietness. If no signal is received the display indicates N/A.
®Powmascables Option Programming Option programming is required only when installing the tuner. The programming is performed with a Bang & Olufsen remote control terminal by initiating a 5 button sequence within 8 seconds after powering up the tuner. When powering up the tuner the red control LED flashes for 8 seconds, and the programming has to be carried out before the control LED stops flashing. When entering a button the timeout is prolonged with another 8 seconds.
®Powmascables Source & Option Selection The following tables show the available input sockets on various Bang & Olufsen audio and video products, how to select them using a remote control terminal and what the corresponding option program of the BOSSCOM DAB/FM tuner should be.
®Powmascables BeoSound 4 AUX 100 - The input is RCA phono sockets. Use BOSSCOM adaptor cable, type 39207438. MasterLink - 410 - 416 If the MasterLink socket is not used, the DAB/FM tuner might be connected and operated via a BeoLink Converter. - 412 Direct Option CableLink Option AUX 100 - AUX 102 - Input Socket BeoSound 1 ®Powmascables Source Selected See page 16 for details on connection of the BeoLink Converter 1611.
®Powmascables Input Socket BeoSound Century Direct Option CableLink Option AUX 103 - AUX 106 - AUX 100 - Direct Option CableLink Option AUX 100 - AUX 102 - Direct Option CableLink Option AUX 100 - AUX 102 - AUX 103 - AUX 106 - Input Socket BeoSound 9000 Input Socket BeoSound 3000 BeoSound 3200 ®Powmascables Source Selected Source Selected Source Selected Remarks Remarks Remarks
®Powmascables BeoSound Ouverture AUX 103 302 In the CableLink mode numeric commands are not accepted. AUX 106 206 In the CableLink mode numeric commands are not accepted. AUX 100 - In the CableLink mode numeric commands are not accepted. MasterLink - 410 - 416 - 412 If the MasterLink socket is not used, the DAB/FM tuner might be connected and operated via a BeoLink Converter. See page 16 for details on connection of the BeoLink Converter 1611.
®Powmascables Input Socket BeoCenter 2300 Direct Option CableLink Option Remarks AUX 100 300 AUX 102 302 AUX 103 303 In the CableLink mode numeric commands are not accepted. In the CableLink mode numeric commands are not accepted. In the CableLink mode numeric commands are not accepted. AUX 106 306 In the CableLink mode numeric commands are not accepted.
®Powmascables Input Socket BeoMaster 6500 BeoMaster 7000 TP1 Direct Option 102 CableLink Option 302 CD 104 204 TP2 103 302 PHONO 106 206 Direct Option CableLink Option Remarks 103 302 In the CableLink mode numeric commands are not accepted. Direct Option CableLink Option Remarks TAPE2 103 302 In the CableLink mode numeric commands are not accepted. AUX 100 - Direct Option CableLink Option Remarks PHONO 106 206 In the CableLink mode numeric commands are not accepted.
®Powmascables Input Socket BeoSystem 3 Direct Option CableLink Option Remarks AV1 AV2 AV3 - 410 414 412 The input is a scart socket, 21 pin AV socket. Use BOSSCOM adaptor cable, type 39207496. AV4 AV5 AV6 - 410 414 412 The input is RCA phono sockets. Use BOSSCOM adaptor cable, type 39207438. MasterLink Source Selected etc. - If the MasterLink socket is not used, the DAB/FM tuner might be connected and operated via a BeoLink Converter.
®Powmascables Connection via BeoLink Converter 1611/1612 BOSSCOM DAB/FM tuner may be connected to a Bang & Olufsen stand-alone audio or video master, TV, via a BeoLink Converter using MasterLink and the AAL inputs. Connected to an audio master and programmed as an ”video source” the DAB/FM tuner may be selected as that, VMEM as an example. Connected to a video master and programmed as an “audio source” the DAB/FM may be selected as that, ATAPE as an example.
®Powmascables Connection via BeoLink Active in any Link Room BOSSCOM DAB/FM tuner may be connected to a Bang & Olufsen BeoLink Active with a vacant ‘PC’ socket. Thus active speakers in any link room allow for the installation of the DAB/FM tuner and the opportunity of having a local radio source controlled directly with the Bang & Olufsen remote control terminal.
®Powmascables Connection to 21 Pin AV Socket on any Bang & Olufsen TV Input Socket All B&O TV models Scart BeoVision 10 BeoVision 8 BeoVision 7 BeoVision 6 BeoVision 4 BeoVision 3 BeoVision 1 BeoSystem 3 Avant models LX models LE models LS models L models MX models ME models AV1 - AV6 ®Powmascables NOT the DECODER input!! Source Selected Direct Option CableLink Option Remarks 110 410 110 410 The input is a scart socket, 21 pin AV socket. Use BOSSCOM adaptor cable, type 39207496.