Notes AUDIO SYSTEMS ® AUDIO SYSTEMS AR3000D CLASS D Mono block Car Audio Amplifiers AR4000D Congratulations on your purchase of a 208% ARMOR Class D Amplifier. it has banes designed, engines rad and manufactured io bring you the highest level of performance and quality, and will afford you years of listening pleasure.
Introduction With the BIS Class D amplifier series, we ars introducing two new CLASS D amplifiers, both designed in the USA. These models feature variable low pass and subsonic filters and a variable input gain control. The AR3000D and AR4000D also incorporate a phase selector switch to help compensate for ime delays In sub woofer applications. For further flexibility in the use of a sub woofer, a variable Bass Boost control has been included.
Troubleshooting If you experience operation or performance problems with this product, compare your installation with the electrical wiring diagram on the previous pages. f problems persist, read the following troubleshooting tips which may help eliminates ts problems. SYMPTOM POSSIBLE REMEDY Amplifier will not Check to make sure you have a good ground connection. pow up. Check that the Re mate input {Tum-On) hee at feast VDC. Check that thees la battery power on tha terminal.
3. Mark the location for the mounting hole screws by positioning the amplifier where you wish to install . Use ascribes or mounting screw, inserted through each of the amp's mounting holes, to mark the mounting surface. if the mounting surface is carpeted, measure the hols centers and mark with a fiat tip pan. 4. Drill pilot holes in the mounting surface for the mounting screws. Place the amplifier In position, and attach the amplifier to the mounting wiseacre securely Using screws.
Strapping Tee AR3000D or AR4000D Amplifiers PUT CONNECTIONS FER SAY SAGE POR POUR, SPRAIN AN TEAL STRONGBOX MASTER AMPLIFIER Front pane! To Auden Output of head unit or Sub woofer output of & signal processor Re mate Subaltern Control OL ee) See LAVE AMPLIFIER Front Pans! PLEASE NOTE: PLEASE NOTE: In the MASTER AMP/SLAVE AMP | In this QUARTER AMP/BLAVE AME configuration, the Lave amp configuration, the Slave sup receives ite audio signal from the. receivables is audio signal from the Buster Ares.