User Guide

Doorbell

Quick Install Guide

Introduction：

The BOSMA doorbell is an accessory sensor to the BOSMA X1 home

security camera. It primarily serves as a simple doorbell at the front door.

When it is pressed, it notifies the camera which plays a doorbell ringing

sound and sends a notification to your phone.

Alternatively, it could also be used as an emergency button for those

that may need immediate attention at any time, e.g. an elderly person at

home.

Button

Fig.1

Installation Guide

1. Pair the doorbell with a BOSMA X1 camera

 Open the BOSMA app, make sure that a BOSMA X1 camera has

been added to your account

PAGE 1
Doorbell Quick Install Guide Introduction： The BOSMA doorbell is an accessory sensor to the BOSMA X1 home security camera. It primarily serves as a simple doorbell at the front door. When it is pressed, it notifies the camera which plays a doorbell ringing sound and sends a notification to your phone. Alternatively, it could also be used as an emergency button for those that may need immediate attention at any time, e.g. an elderly person at home. Button Fig.1 Installation Guide 1.
PAGE 2
 Tap “+” button at the top-right corner, and select “Doorbell”  If you have more than one BOSMA X1 camera, select the one you want the doorbell to be paired with  Long-press the doorbell button to pair with the camera
PAGE 3
Fig.2 2. Select installation location You may install the doorbell on the front door. The sensor uses simple adhesive to stick to a surface. Please install the sensor on a relatively flat and smooth surface Peel off the adhesive backing, then stick the doorbell to the surface. See figures below. Fig.3 Specifications Model：DR0001 Range (open area): 300ft Radio Frequency: 915MHZ Voltage: DC 3.0V Amperage: Idle ≤ 600nA; Working ≤ 25mA Working Temperature: 14 °F ~ 122 Dimensions: 40 * 80 * 10.