Door Sensor Quick Install Guide Introduction DS0001 is a wireless magnetic door sensor developed by BOSMA. It has real-time detection of door and window opening/closing. Modern design, smooth lines, very good with home decoration. High sensitivity within 100 meters distance of the host has a very high sensitivity. There is a code setting between the door magnetic sensor and the host, and its unique address code is learned to the host when the code is aligned. This sensor is a separate trigger type.
Work Temperature: -10℃ ~ +50℃ Appearance specifications: 60.2*45.7*12mm Color: White Feature Sens Magnets or This product use the principle of magnetic adsorption. When the sensor and the magnet are separated beyond a certain distance (about 2cm), the associated equipment will receive an alarm message. Install Guide 1. Add device * First, Set up the device with gateway (BOSMA-X1) according to its instructions and APP guidance to ensure that it is in working state.
2. Matters needing attention * Please pay attention to the following situations before installation, so as to avoid failure use after installation. ⚫ Don not install in the outdoor easily damaged location. ⚫ Do not install to the base is not strong. ⚫ Do not install near the magnetic. 2. Select the installation location Suit door, window, Drawer and so on that most place is prevented, at the same time door magnet prevents lampblack, moisture, also apply to kitchen and toilet.
Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
DOORBELL Quick Install Guide Introduction: DR0001 is an intelligent wireless digital doorbell developed by BOSMA. It has strong penetrability and long-distance signal transmission. Thanks to wireless connection, the installation is more convenient because no wiring is needed. With original and elegant design, the doorbell can match your home decoration easily and flexibly.
Dimensions: 40*80*10.5mm Color: White Feature : Button Fig.1 Install Guide 1. How to add? * Make sure the device with gateway (BOSMA-X1) is added correctly and in working status already. ⚫ Tap “+” button at the top-right corner to add device. ⚫ Long press 3s to wake up the Doorbell (Fig. 2). ⚫ Follow the instruction inside the application to bind the device.
Fig.2 2. Where to use? ⚫ For families with the aged. ⚫ For big houses. ⚫ For houses with many floors. 2. How to install? Remove cover of foam tape on the backside of doorbell, then put it on properly place of wall or door, press and hold for few seconds to make it fixed completely (Fig. 3) Fig.