Spec Sheet

Video | VIDEOJET connect 7000
VIDEOJET connect 7000
www.boschsecurity.com
u Operates a variety of Bosch HD PTZ cameras,
including MIC7000
u Bi-directional audio, Alarms, washer pump control,
local storage slot for a CompactFlash (CF) memory
card, built-in web browser for control of connected
cameras
u One (1) HD-BaseT PoH dedicated for one RJ45
Ethernet port; three (3) RJ45 ports; two (2) SFP
ports
u Support for daisy-chaining of multiple cameras
The device VIDEOJET connect 7000 (VJC-7000-90) is a
full-featured network power supply unit that can
operate a variety of Bosch PTZ cameras such as
MIC7000. The device includes one (1) HPoE network
connection, two (2) standard network interfaces for
connections to additional IP devices, one (1) slot for
an optional CompactFlash (CF) memory card, two (2)
slots for use with SFP-based fiber optic modules,
alarm/washer control interfaces*, and audio I/O*.
* Note: This feature is valid only for a MIC7000 camera
"bound" to Camera 1.
System overview
Notice
For full functionality, a MIC7000 camera
connected to VIDEOJET connect 7000 requires
firmware version 5.93 or later. Download the
firmware from
https://downloadstore.boschsecurity.com.
Note:
To achieve a distance of 100 m (328 ft) using
Cat5e/Cat6e cable, Bosch recommends using cable
with a minimum rating of 350 MHz.
Certifications and approvals
Electromagnetic
Compatibility (EMC)
Complies with FCC Part 15 Class A,
ICES-003, and CE regulations, including
latest versions of
EN 50130-4,
EN 55022:2010
EN 61000-3-3,
EN 61000-6-1, and
EN 61000-6-2
Product Safety Complies with UL, CE, CSA, EN, and IEC
Standards 60950-1 & 22
Ingress Protection
Rating/
Standard
IP66, IP67, NEMA Type 4