Data Sheet

Engineered Solutions | LECTUS duo 3000 EV1 line
LECTUS duo 3000 EV1 line
www.boschsecurity.com
u Two interfaces - RS485 and Wiegand
u Reader for MIFARE Desfire EV1
u Water and weather resistant - IP65
u Wall or mullion mount
u Tamper switch
System overview
The LECTUS duo 3000 DESFire EV1 line consists of
two readers for MIFARE classic and EV1 cards and
transponders. They support the data record of Bosch
coded MIFARE credentials and the CSN of ISO14443A
cards as well.
Both readers provide a 26 Bit Wiegand and RS485/
OSDP host interface, selectable easily by DIP switch.
When operating in RS485/OSDP mode up to eight
readers can be connected to a respective controller,
e.g. AMC2-4R4. Reader address is settable via four DIP
switches individually. Running in that mode readers
can be easily supervised.
Three LED indicators and a beeper give clear feedback
to the user during operation. The reader’s logo is
illuminated in the dark. The reader is IP65 rated and
fits for indoor and outdoor use.
Technical specifications
Electrical characteristics
Input voltage 8.5 V to 16 Vdc – max. 18 Vdc
Current draw 65 mA @ 12 Vdc
Max.: 130 mA @ 12 Vdc
Operational Characteristics
Tamper output Open collector, active low, 32 mA max
sink current.
Optical Technology
Wiegand D0 output 5 V (TTL)
Wiegand D1 output 5 V (TTL)
Green LED control input Active low
Red LED control input Active low
Buzzer control input Active low
RS485 OSDP protocol
Wiegand IF D0/D1 Wiegand protocol
Keypad LECTUS duo 3000 E: none
LECTUS duo 3000 EK: 2x6
Environmental Characteristics
Operating environment Indoor and outdoor use - all weather.
Operating temperature -25 °C to 65 °C (-13 °F to 150 °F)
Operating humidity 0 to 95% (Non-condensing)