User's Manual

Preliminary Users Manual

Electro-Voice Model CSB-1000 Wireless Microphone Transmitter

(Ev Band C frequencies)

The Electro-Voice (Ev) CSB-1000 Is a Professional Grade Wireless

Transmitter operating within the frequency range of 776.0 MHz to 800.000

MHz. ( Ev Band C frequencies).

The CSB-1000 combines frequency agility and ease of use like no other.

The transmitter operates within a 24 MHz wide segment in 25 KHz steps.

The high quality audio circuitry and advanced Radio Frequency (RF) signal

processing offer broadcast quality signal-to-noise and audio clarity.

System features include:

• Durable Painted Metal Case.

• TA-4F Audio Connector.

• Smart Battery circuit, accepts either polarity orientation.

• Permanent Flash Memory for frequency/setting storage.

• On-Loc prevents accidental power off.

• LCD Display for ease of viewing.

• Flexible quarter wave external Antenna.

Quick set-up:

1. With the Power Switch on the transmitter OFF, install a fresh battery into

the transmitter.

2. Place the transmitter Power Switch to the ON position.

3. The Battery light near the Off/On switch will flash once and then off.

The display will also come on briefly displaying the battery level.

4. The screen will stop at the GP (Group) and CH (Channel) screen. If the

Group and Channel match the desired receiver group and channel,

Proceed to Step 7. If not, proceed to Step 5.

PAGE 1
Preliminary Users Manual Electro-Voice Model CSB-1000 Wireless Microphone Transmitter (Ev Band C frequencies) The Electro-Voice (Ev) CSB-1000 Is a Professional Grade Wireless Transmitter operating within the frequency range of 776.0 MHz to 800.000 MHz. ( Ev Band C frequencies). The CSB-1000 combines frequency agility and ease of use like no other. The transmitter operates within a 24 MHz wide segment in 25 KHz steps.
PAGE 2
CSB-1000 Users Manual Page 2 Quick set cont’d. 5. To select a different GP/CH, press MENU if required to get to the GP/CH display. Press the SET button once and the Group number will flash. Use the up and down arrows to change the group number. Press the SET button to save the Group. 6. The Channel number will start flashing after step 5. Use the up/down arrows to change the Channel number. Press SET and the channel is now saved. 7. Talk test the transmitter in conjunction with the receiver/audio syatem.
PAGE 3
CSB-1000 Users Manual. Page 4 Approval Information: The Telex/Ev CSB-1000 Transmitter is Type Accepted under United States Federal Communications Commission Part 74. The Telex/Ev CSB-1000 Transmitter is Certified to Industry Canada RSS123 rules. Licensing of Telex/Ev equipment is the users responsibility and licensability depends upon the user’s classification, user’s application and frequency selected.