Remote Keyless Entry (BONTEC-T016, BONTEC-E016) BONTEC Co., Ltd.
FCC COMPLIANCE STATEMENT THIS DEVICE COMPLIES WITH PART 15 OF THE FCC FULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITION; (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDERSIRED OPERATION. CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
USER MANUAL NAME: REMOTE KEYLESS ENTRY SYSTEM This RKE System is to be installed on motor vehicles as OE (Origianal Equipment) item It is intended for auto-locking/unlocking of the door SYSTEM CONSTRUCTION SYSTEM IN VEHICLE Antenna Door actuator LOCK UnLock Button Button B/Glass Panic Button Signal Button ETACS 12V
OPERATING SUMMARY 1. By the driver of the vehicle, TRNSMITTER's button is pushed. 2. TRANSMITTER sends appropriate CODE by RF frequency. 3. ETACS gets the code and decodes it. 4. When Rx proves it to be the right code, ETACS control Door relay 5. ETACS receive it, and drive the actuator. The system has the function as follow: - Whenever DATA is sended to ETACS, LED is turned 'ON'. 1) LOCK & UNLOCK If LOCK or UNLOCK button is pushed for less than 1 sec, then TRANSMITTER sends the LOCK or UNLOCK DATA.
Description of Transmitter and ETACS 1. PRIMARY FUNTION - Remeto door lock/unlock/Back Glass Open/Panic - LED turn on ( When the lock/unlock/B.G.O/Panic button is pushed ) - Operating distance : 7~ 10 m 2. ELECTRICAL CHARACTERISTICS TRANSMITTER ETACS Operating voltage 3 VDC 10 ~ 16 VDC Consumption current Max 20mA Max 5.
3.
2) ETACS ETACS RF DATA INPUT Output Circuit CAR Door Lock Door lock Relay Door Unlock Door unlock Relay Back Glass Open Back Glass Relay Panic Hazard Relay Horn Relay