Bonso Group Document Number ENG_TEL_A001 Rev # 00 Title : BS001 APPROVAL DOCUMENTS INSTRUCTION MANUAL Application : FCC APPROVAL Release Date : 03 Feb.
[RF EXPOSURE STATEMENT : OVVBS001 / Bonso Electronics Ltd.] - CAUTION! - IMPORTANT SAFETY INFORMATION Your wireless hand-held portable transceiver contains a radio frequency transmitter. When the PTT button is pushed, the transmitter sends out RF signals. The device is authorized to operate at a transmit duty factor not exceeding 50% using alkaline “AAA” size batteries to comply with Federal Communications Commissions (FCC) RF exposure safety level guidelines for hand-held wireless devices.
Bonso Group Document Number ENG_TEL_A001 Rev # 00 Title : BS001 APPROVAL DOCUMENTS Owner’s Manual For Model BS001 FRS/GMRS Radio FEATURES ☞ 22 Channels ☞ LCD Backlighting ☞ Squelch Tail Clearance ☞ Paging/Call ☞ Scan ☞ VOX ☞ Roger Beep ☞ Baby monitor ☞ Monitor ☞ Dual Watch ☞ Priority Channel Appointment ☞ Manner Mode ☞ Low Battery Indicator Use and Care 1. Do not use alcohol or cleaning solutions to clean the radio. 2. Do not immerse the radio in water. 3. Use a soft damp cloth to clean the radio 4.
Bonso Group Document Number ENG_TEL_A001 Rev # 00 Title : BS001 APPROVAL DOCUMENTS Control Buttons & Indicators Manner Indicator Use to : Use - Backlight ON - Monitor ON Use to : - Increase the volume - Scroll through the menu to : Use - Talk on the Radio - Send a Call Tone - Save a setting Use to : - Turn On/Off the Radio - Enter/Exit the menu to : Use - Scan for active channels - Lock the keypad to : - Decrease the volume - Scroll through the menu Microphone Speaker LCD Display Baby
Bonso Group Document Number ENG_TEL_A001 Rev # 00 Title : BS001 APPROVAL DOCUMENTS Installing Batteries The BS001 radio operates with either 4 AAA Alkaline Batteries or optional NiMH battery. The belt clip should be removed to ease installation or removal. To install the batteries: 1. With the back of the radio facing you, remove the Battery Cover by sliding it down from the unit. 2. Insert 4 AAA batteries observing the polarity as shown, or install the optional battery.
Bonso Group Document Number ENG_TEL_A001 Rev # 00 Title : BS001 APPROVAL DOCUMENTS 2. Press and hold PTT button and speak in a normal voice into the microphone. The TX icon will appear continuously on the LCD Display when transmitting. 3. To receive messages, release the PTT button. The RX icon will appear on the display when your radio is receiving a transmission. Call Tone : The BS001 can transmit a call tone for a fixed length of time. To send a call tone, press the PTT twice rapidly.
Bonso Group Document Number ENG_TEL_A001 Rev # 00 Title : BS001 APPROVAL DOCUMENTS Roger Beep Tone : Whenever you release the PTT button, a “Roger Beep” tone may be transmitted to let your friends know you are finished talking. To enable the Roger Beep ; 1. Press the button repeatedly until the “rb” appears on the display. 2. Press the and to set the Roger Beep tone on or off. An “on” or “oF” will appear on the display during setting. 3. To exit the Menu, press PTT button.
Bonso Group Document Number ENG_TEL_A001 Rev # 00 Title : BS001 APPROVAL DOCUMENTS 2. Press the and buttons to set the Baby monitor on or off. An “oF” , “1” or “2” will appear on the display during setting. The “1” is master (TX /Baby side), “2” is slaver (RX). 3. To exit the Menu, press PTT button. Monitor Mode : To enable the monitor mode, press the mode , press PTT button or press the button for 2 seconds. To exit the this button for 2 seconds..
Bonso Group Document Number ENG_TEL_A001 Rev # 00 Title : BS001 APPROVAL DOCUMENTS Technical Specification A. Specification Channels : 22 Channels Operating Frequency : UHF 462.5625 ~ 467.7125 MHz Power Source : 4 AAA Alkaline or rechargeable Ni-MH Batteries Output Power : Typically 0.5 Watts B. Current Drain : Receive : 145 mA max Transmit : 400 mA max Standby : Average 13 mA C. Operating Time : Based on 900mAH (Alkaline battery) capacity Talk Time : 2~2.
Bonso Group Document Number ENG_TEL_A001 Rev # 00 Title : BS001 APPROVAL DOCUMENTS FCC NOTICE THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDERSIRED OPERATION.
Bonso Group Document Number ENG_TEL_A001 Rev # 00 Title : BS001 APPROVAL DOCUMENTS GENERAL INFORMATION Application : FCC APPROVAL Release Date : 03 Feb.
Bonso Group Document Number ENG_TEL_A001 Rev # 00 Title : BS001 APPROVAL DOCUMENTS LABEL FORMAT & LOCATION FCC ID : XXXXX MODEL : BS001 MADE IN CHINA BONSO ® S/N XXXXXXXXX CHECK LIST (FCC) 1. Testings required for FCC and SAR. 2. FRN : 3. FCC ID : 4. Model Number : BS001 5. Trade Name : BONSO 6. Model Description : 22Channels FRS/GMRS 7. Applicant Company Name : BONSO ELECTRONICS LTD. Address : Unit 1106-1110, 11/F., Star House, 3 Salisbury Road, Tsimshatsui, Kowloon, HongKong. Mr.
