BS-500 OPERATING INSTRUCTIONS FCC NOTICE Warning: Adjustment to this unit or replacement of any transmitter component (crystal, semiconductor, etc.) to this unit that could result in a violation of the rules. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
your face and speak in a normal voice, with the antenna pointed up and away from the face. If you wear the handset on your body while using the headset accessory, use only the supplied belt clip for this product and when transmitting, take it out of the belt to ensure that the antenna is at least 1 inch 2.5 centimeters) from your body. . Use only the supplied antenna. Unauthorized antennas, modifications, or attachments could damage the transmitter and may violate FCC regulations.
6. 7. Press and hold button to transmit. SCAN button Use for automatic channel scanning MON button Press this button to hear conversation from other FRS users OPERATING INSTRUCTION 1. Turning the unit ON and OFF To turn the unit ON, press and hold the power ON/OFF button for about 2 seconds. To turn the unit OFF, press and hold the power ON/OFF button for about 5 seconds. Sending call tones Press the CALL button once.
Press FUNCTION button two times. While the CSS icon is blinking press UP/DOWN button to select CUSS code. 8. Monitoring Press and hold MON button to listen to other FRS users. 9. Weather Function Press FUNCTION button for 5 seconds. While the “w” icon is blinking, press the FUNCTION button again and you can see the weather channel. Press U/DOWN button to select weather channel. 10. Low Battery Indication The unit has 3-stage low battery indication function. In the last stage, the last icon will blink.