User's Manual

840-10

Wireless Portion Scale

840-10 picture goes here

Scale with water moisture on the

platter ,Remote Display, foot-tare

Specifications

20 lb x 0.01, 10 kg x 0.005, 20 lb x 0.2 oz Capacity

( Dual capacity)

40 lb x 0.02, 20 kg x 0.01, 40 lb x 0.4 oz

Platter Size 10.9 x 12.3 inch / 277 x 313 mm

Product Size 10.9 x 12.3 x 2.3 inch / 277 x 313 x 59 mm

Display 1.6” LCD 5 digits with Backlight

Units kg, lb, lb:oz

Power AC Adapter ( DC 12V )

Splash-Proof ( IP-67 )

Option Remote Display, Foot-Tare

Remoter Display

Battery Life 6 x AAA rechargeable battery pack (XX hours of continuous use)

Auto Shut-Off

(Remote display)

XXX minute after non-using with zero weight display

XXX minutes after non-using with non-zero weight display

Specifications are subject to change for improvement without notice

Warranty

For a period of one(1) year from the original

purchase date to the original purchaser only

Please file the warranty service through

one of the following;

WEB www.bonsousa.com

E-Mail service@bonsousa.com

Fax Registration

PAGE 1
840-10 Wireless Portion Scale 840-10 picture goes here Scale with water moisture on the platter ,Remote Display, foot-tare Specifications Capacity ( Dual capacity) Platter Size Product Size Display Units 20 lb x 0.01, 10 kg x 0.005, 20 lb x 0.2 oz 40 lb x 0.02, 20 kg x 0.01, 40 lb x 0.4 oz 10.9 x 12.3 inch / 277 x 313 mm 10.9 x 12.3 x 2.3 inch / 277 x 313 x 59 mm 1.
PAGE 2
Operating the Scale > Make sure that the scale is plugged into the proper outlet and on a flat and leveled surface > Slide a proper display control unit ( remote vs local display ) into the back of scale body, making sure the display control interface from adapter connects securely to adapter on scale Options and Accessories Standard 1. Scale Platform 2. Weight display with a display control unit Optional accessories 1. Remote display with a display control unit 2.
PAGE 3
Warning: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.