Product view & Functions Power button We f Move left Luis Foi adjustment SET Keystone correction Bestiary fight Biracial source — pee SE 4 Peen Tight Esc Menu Keystone correction Signal source Eso Ve { Move left Indicator light Lens Power bullion Focus adjustment V+ | Move right Power bunion: Press this bunion to shut on or off the device. Volume plus and minus tabulator: Press the two bunions bo increase or decrease volume. They can also be used in the menu as selection and parameter adjustment.
Remote Control Instructions 1. Power nonfood: turn the machine nonfood. 2. Return: return to the last status when playing media or Menu Selling. 3. Signal Source: short press fo access the signal source selection page. 4. Menu © show menu settings on the projection sores, &. Up! Down button © Menu selection page © It can select an tem or adjust the value In the Menu, When playing a video © it can select the last or next file. 6.
® Multimedia boot screen Tier the projector starts working, the screen displays takes about 10 seconds fo come Info the multimedia screen, ® Focus & Keystone Sometimes, the image projected on the wall looks like a trapeze rather than a square, causing distortion that needs to be avoided, You can adjust it with the keystone adjustment wheel (3) = see following pictures, * Image focus Put the device vertical fo the projector screen or white wall.
NOTE: The device and connection of laptop may not ba able to display images at the same me, if that happens, set the computer display attributes, select for CRT output mode, Video input socket: from now on the interface can be connected fo the LD player, DVD players, video canes and video player VIDEO or audio output socket, Bran Widen Play Audio output: Audio signal from he outburst port of the device, If you want to high power play music Input end connected to textual power amplifier, HDMI signal input th
Hale Operation Input source selection =¥ Selecting an input signal from the device: (Check that the comet signal cable is connected). 2-3 Press the 8 button on the device or the SOURCE button on thee remote control to display he right interface. “3-3 Confirm whether correctly connection fo the signal cable press 4 ¥ buttons on the device or on the remote control to select the following input PC, AV, HDMI, SI/USE (DUMP.