theICEBRKR Ski goggles bone 1Function introduction ・Ski Team newsletter ・ Connect to any Bluetooth headset ・Multiple devices are connected simultaneously ・ Communication distance between two people ≥ 100 meters ・ Connect two phones simultaneously ・ Stereo music ・ Voice calls ・ Voice prompt 1
・Used when rechargeable ・Bluetooth ・Connect the walkie-talkie ・Playback controls ・ Noise control 2.Product introduction ・ON/OFF ・MFB ・VOL+ ・VOL・Type-C ・LED 3. Key operation instructions 3.1 ON/OFF ・ Power on (press for 3 seconds at power off until you hear "Welcome to use magic Tooth product" and the blue light is on for 1 second.) ・ Pairing mode (press for 6 seconds on shutdown until "pairing" is heard, with red and blue lights flashing alternately.
hear "Initiate intercom", and "Connected intercom" when connected successfully.) Note: When B first connects to A and then to C,B needs to press the power button twice to initiate intercom to A, and B only needs to press the power button to initiate intercom to C. ・ End a Bluetooth intercom call (click on intercom to hear "End intercom").
・ The voice switches between the Bluetooth headset and the phone itself (" dong "is heard after pressing the button for 2 seconds, and the red light flashes once every 1 second). ・ Stop the call (click briefly to hear "dong".) ・ Voice call (When there is no call, double-click to hear "Voice call". ・ Music play/Pause (click to connect) ・ Switch between Bluetooth and FM mode (on, triple tap and hear "Bluetooth Mode" or "Radio Mode"). 3.
・ To play the music, press the volume - down button. 4. Bluetooth status indicators and prompts ・ Boot state (when bluetooth is connected, "Bluetooth is connected" is heard, and the blue indicator flashes once every 6 seconds; When you hear "Bluetooth disconnected", the blue indicator flashes twice every 6 seconds. ・ Low power alarm (prompt "low battery" every 60 seconds when the machine is on, indicating The indicator lights turn red and flash.
ICEBRKR enters the pair state. 8.2 ICEBRKR 与手机/GPS/MP3 配对. ICEBRKR pairs with phone /GPS/MP3 Step 1: Place the ICEBRKR and phone within 1 meter of the device. Step 2: Follow Step 8.1 to get ICEBRKR into the pairing state. Step 3: Open your phone's Bluetooth search device, select ICEBRKR connection, and hear "Bluetooth connected" to indicate a successful connection. 5.
Step 1: Place the two IceBrkRs within 1 meter of each other. Step 2: Follow step 8.1 to pair both IceBrkRs. Step 3: Press the power button on any ICEBRKR, and it automatically searches for another ICEBRKR Line pairing. When you hear "intercom pairing successful," you can start intercom. 5.5 Group call Settings (Figure demonstration) Step 1: Clear the matching records for A and F.
disconnect DE temporarily. 5.E is paired with F. Step 3: Concatenate ABCDEF 1. D Press the on/off key to connect E; 2. C Press the on/off key to connect D; 3.A Press the on/off key to connect B. E and F are not disconnected after the completion of the second step. At this point, the PAIRING of ABCDEF is complete and group intercom can begin.
Note: Non-Maxto intercom features are added to the ICEBRKR after the phone is connected It may cause an abnormal network call, and it will not affect the mobile phone. 7. Function priority Level 1: The phone & adapter receives incoming intercom Level 2: Intercom connected by the intercom control line Level 3: Bluetooth intercom 8.
* The actual time may vary depending on the type of phone and the state of use. * There will be some deviations in working distance due to environmental and climatic influences. 11. Matters needing attention 1.The applicable storage temperature of this product is from -20℃ to 60℃. Please do not store in an environment with too high or too low temperature, otherwise the service life of the product will be affected. 1. Do not expose the product to open fire to avoid explosion; 2.
- Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules.