4. Clean filter pad properly. 5. Assemble in reverse order, ensuring the panels are fitted correctly with no gaps or tabs left outside. 8. Wiring Diagram ER CHISEL 2 9. Troubleshooting Problem Reason Solution No air flow 1. Power is nat connected. | 1.Plug In the power cable proper. 2. Power Is not turned ON. | 2.Press the Alr Speed button to start. 3. Body damaged. 3. Retum to Service Center. ‘Abnormal Sound 1. Foreign article inside 1. Ramove rear cover and wet pad, remove body of unt. foreign articles.
I. There Is nothing wrong with the appliance. ii. The defective operation of the appliance is due to failure of electricity or water supply. I. Defects are caused by neglect, Income ct application, abuse, normal wear and tear or by accidental damage of the appliance. i. An unauthorized person has attempted to repair the appliance. v. The appliance has been changed or modified in any way. vi. Situation arises referenced in the trouble-shooting guide.
null and cold. A valid, legible product serial code must also be visible to obtain service under the Climate Technologies Pty Ltd evaporation cooler 1-year limited warranty. If the authorized retailer and Climate Technologies Pty Ltd deem that a product cannot be serviced and a replacement is necessary, a similar product of equal or greater value will be shipped to you free of charge by Climate Technologies Pty Ltd.