Boly Trail Camera BG310 Series Infrared Digital Scouting Camera User Manual BG310 Series
Boly Trail Camera BG310 Series Table of Contents 1. Getting Started....................................................................................3 2. Camera Operations.......................................................................... 4 2.1 Batteries / Power Supply....................................................4 2.2 TF Card Information............................................................5 2.3 SIM Card Information.........................................................5 2.
Boly Trail Camera BG310 Series 1. Getting Started BG310 series camera, this is a digital infrared surveillance camera. Use 1.44" color LCD display and 2*18650 battery (pointed head, length: 67~69mm), the USB port connects to the solar panel can charge the 18650 battery. You can choose different models according to different needs.
Boly Trail Camera BG310 Series 2. Camera Operations 2.1 Batteries / Power Supply Battery The camera is powered by 2*18650 batteries. (pointed head,18650 battery, length: 67~69mm) External power supply It is also possible to power the device or charge the 18650 battery in the device via an external USB power supply adapter(5V/2A) or solar panel.
Boly Trail Camera BG310 Series 2.2 TF Card Information This camera uses a TF card, to take full advantage of the latest technologies, we recommend Class 10 TF cards or better, which have fast transfer speeds and long durability for extensive shooting in the most extreme outdoor conditions. Insert the TF card into the camera before turning on the camera This camera supports up to a 32GB capacity TF card and has no built-in internal memory.
Boly Trail Camera BG310 Series on the camera. OFF Mode To turn off the camera when the display screen is active, press and hold the OK button until the screen powers off. The camera will still consume a small amount of battery power while in OFF mode. We recommend removing the batteries if the camera will not be used for a long period of time.
Boly Trail Camera BG310 Series 2.5 Manage Images and/or Videos Place the camera in TEST/SETUP mode and press the POWER button to view images or videos, the latest image or video will be shown on the LCD screen. Press the ▲/Up or ▼/Down buttons to cycle through the pictures and videos were taken. NOTE: Video cannot be viewed directly on the camera. 2.6 Sending via MMS/GPRS/Molnus This function is only available with communication function models.
Boly Trail Camera BG310 Series 2.7 Password Setup For encryption settings, enter your four-digit pre-set password to enter the camera. This function helps protect your privacy. This function is off by default. To use this function: 2.7.1 Press ▲/▼ to adjust the number from 0~9, and /► to change the password 2.7.2 The same password must be entered twice to take effect. 2.7.3 After the password is set up, you will be required to enter the same password on the next boot to enter the camera.
Boly Trail Camera BG310 Series 3. Camera Setup Settings & Display 3.1 Settings Interface & Display To update the camera settings, turn the camera on to activate the display screen.
Boly Trail Camera BG310 Series 3.2 Wireless Model Setup The features described in this section only support communication models. 3.2.1 Mobile Communication The camera can receive and respond to commands sent via SMS, Molnus and the Apple or Android application, as long as the camera is correctly connected to a wireless carrier.
Boly Trail Camera BG310 Series STEP 1> Select your country and carrier. STEP 2> Check WAP/Internet Parameters. Fill out the required fields (marked with an asterisk), enter an Email server such as “smtp.gmail.com” or “smtp.bolymedia.com.
Boly Trail Camera BG310 Series STEP 3> Choose between default or manual settings. For first time users, we suggest using the default settings. STEP 4> Enter the phone number of the phone to receive/send the remote commands and images in the “administrator number” field and email address in “Receive Email 1” field (This is NOT the phone number of the inserted SIM card that resides in the camera). STEP 5> Save the .txt file in the GSM folder of the TF card after all settings are complete.
Boly Trail Camera BG310 Series STEP 2: ①Input the model of your camera ②Input your SIM card number which is inserted in your camera ③Select your camera model number, then click “Add” to finalize. STEP 1 STEP 2 STEP 3: Click “send,” then choose the country and provider that corresponds with your SIM card (which is inserted in your camera). After that, choose “Check WAP/Internet Parameters” to check whether you have all the required parameters filled in.
Boly Trail Camera BG310 Series STEP 4: In the Select Mail Server: you can decide on using a Boly Email or Other Email service. Select “my device” to add or delete a device. STEP 5: Select “Setting” to set the user's parameters or set to default. STEP 6: Select “Get Photos” means you can get a photo from your camera device. There are two ways to send an image via: Cellphone: Send MMS to the phone. Email: Send an email by GPRS.
Boly Trail Camera BG310 Series 3.3 Cloud Service - Molnus Molnus is a cloud service that allows users to access to transfer and store images taken through the cameras with the use of compatible devices or a computer. To get started, you need to supply the camera with batteries and a SIM-card that has internet access. You also need to have the phone number and the APN name to the SIM-card you will use for the camera. The operator of the SIM card provides the APN name. Each operator has its own APN name.
Boly Trail Camera BG310 Series Step4 Press the Register camera button to register your camera. (In Molnus) Step5 Press the Register button in Molnus, and wait for about 5 minutes. (In Molnus) The registration should now be done, and the camera should now be able to upload images to Molnus. Test the function by moving in front of the camera. Within a few seconds to a minute, the images will show up in the gallery in Molnus.
Boly Trail Camera BG310 Series Photo Burst Video Size 12 MP Day - 10 MP Night 5 MP Day - 5 MP Night Default: 18 MP Day - 14 MP Night Choose the number of photos taken after the camera is triggered: 1 Photo, 2 Photo, or 3 Photo. If Pic+Video is selected, Photo burst defaults to 1 photo regardless of the entered value. Default: 1 Photo Choose the video size: 1280x720 or 640x480. Default: 1280x720 Choose the duration of the video recording.
Boly Trail Camera BG310 Series Camera Position Recycle Storage Send To Send Mode non-working hours. The effective value ranges from 00:00 to 23:59. When this parameter is set to Off, the camera works at all times. When the timer switch is ON, the camera works only during the time according to the preset settings. Default: Off Used for multiple cameras in an area. You can set an A-Z indicator for each of your cameras to distinguish between which photos are from a specific camera.
Boly Trail Camera BG310 Series Default: Instant SMS Control enables mobile communication functionality. When SMS Control to ON, the camera can receive and respond SMS Control to your SMS commands. Default: Off Setting the picture size which will be sent to your phone or email. There are 3 options for this setting. Low: Sends a severely compressed picture. Attachment Size Normal: Sends a slightly compressed picture. *High: Sends the original pictures.
Boly Trail Camera BG310 Series 4. Troubleshooting 1. There is something in front of the camera lens. Is the camera broken? A: The camera is not broken. It’s an IR-cut filter. When the camera is powered on, the IR-cut will cover the lens. Only when the camera is powered off will the IR-cut be at a random place, sometimes covering the lens. 2. The display screen is suddenly black. A: The camera may be in “Hunting mode.” Press MENU to wake it up. If there is no response, the camera may be powered off.
Boly Trail Camera BG310 Series 5. PIR Detection Zone This camera has a new patented PIR,the following picture shows the compared detection zone between normal PIR and the new patented PIR. The PIR detection angle (α) is smaller than the field of view (FOV) angle (β). The advantage of this design is to reduce empty an empty picture’s rate and capture most, if not all, objects in motion.
Boly Trail Camera BG310 Series 6. Technical Specifications Image Sensor 3MP CMOS Sensor F/NO=2.4 FOV(Field of View)=57° 940nm 2pcs 100ft 100ft Lens LED Type LED Number PIR Detection Range Illumination Distance Display Screen of Remote Control Memory Card Image Resolution Video Resolution PIR Sensitivity 1.44" Color LCD Up to 32 GB 18 MP Day - 14 MP Night 12 MP Day - 10 MP Night 5 MP Day - 5 MP Night 1280x720,640×480 Adjustable (High/Normal/Low/OFF) Trigger Time 0.
Boly Trail Camera BG310 Series 7. Parts List BG310/BG310-FP Part Name Quantity Camera One Belt One User Manual 18650 Battery One Two (BG310-FP with) TF Card One (BG310-FP with) TF Card Adapter (BG310-FP with) One BG310-M/BG310-MFP Part Name Quantity Camera One Belt One USB Cable One User Manual One 4G Antenna 18650 Battery One Two (BG310-MFP with) TF Card One (BG310-MFP with) TF Card Adapter (BG310-MFP with) One Version 1.
Boly Trail Camera BG310 Series WARRANTY CARD Customer Name: Contact Address: Date of Purchase: Contact Tel: Model No.: Series No.: Retailer: The camera manufacturer provides 12 months warranty for this product against manufacturing defects or malfunctions. If your camera fails to function under regular use within one year, the camera manufacturer will repair or replace the camera free of charge. This warranty does not cover improper use of the camera resulting in damage.
FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.