Infrared Mobile Digital Scouting Camera User’s Manual MG883G-12mHD FCC ID: Y2L00006
Content 1 Instruction....................................................................1 1.1 Camera Body Interfaces................................... 1 1.2 General Description......................................... 1 1.3 Remote Control................................................ 2 1.4 Shooting Information Display........................3 1.5 Two Way Communication...............................3 1.6 Cautions.............................................................4 2 Quick Start Guide...........
MG883G-12mHD 1 Instruction 1 Instruction 1.1 Camera Body Interfaces 1.2 General Description This camera, a digital scouting camera with black IR and 3G communication function, is a digital infrared surveillance camera, triggered by any movement of humans or animals monitored by a high sensitive Passive Infrared (PIR) motion sensor, and then automatically captures high quality pictures or records video clips according to default settings or preset customer settings.
MG883G-12mHD 1 Instruction settings. There is a 1.5” color LCD display screen on the camera and a sound recorder embedded in the camera. A laser pointer is used to help target the photo area of the camera. It is resistant against water and snow. The camera can also be used as a portable digital camera. 1.3 Remote Control The remote control is the input device for the camera and is primarily used for customer settings. This is an infrared type wireless remote control.
MG883G-12mHD 1 Instruction 1.4 Shooting Information Display When the camera is turned on (power switch is slid to TEST position), the current settings will be displayed on the screen. 1.5 Two Way Communication You can set SMS control submenu as ON to open the two way communication function. Under this setting, the camera can receive and respond to your SMS command or the Android APP command. This camera can send pictures instantly to your mobile device via WCDMA/GSM network.
MG883G-12mHD 1 Instruction just when a picture or video has been taken. The camera sends MMS or Email message through MMSC(MMS Service Center) or GPRS network, so before using this function, you need to open MMS and GPRS service from your service provider. It supports following bands:GSM with 850MHz, 900MHz, 1800MHz and 1900MHz；WCDMA with 850MHz, 900MHz, 1900MHz and 2100MHz. SIM card Icon：There are two SIM card icons which means stand for different installation situations.
MG883G-12mHD 1 Instruction to a computer. In this case, the SD card function is as a removable disk. ★In TEST mode, the camera will shut down automatically after 3 minutes if no operation is done. Please turn on the power again if you want to continue to work with the camera.
MG883G-12mHD 2 Quick Start Guide 2 Quick Start Guide 2.1 Power Supply To supply power for the camera, four or eight size AA batteries are needed. 1. High-density and high-performance alkaline batteries (Recommended) 2. Rechargeable alkaline batteries 3. Rechargeable NiMH batteries When in a low-battery state, the camera will be automatically shut down after two indication sounds. Please change the batteries at this time.
MG883G-12mHD 2 Quick Start Guide 2.2 Insert the SD card and SIM card Open the bottom cover. Insert SD card and SIM card into the card slot. Please note that the SD card is on the “write” (not locked) position otherwise the camera will not function correctly. 2.3 Do the Camera Settings Down load the camera setup software (BMC_config.zip) with a simple instruction from our website. The specified website is written in the last page of the manual.
MG883G-12mHD 2 Quick Start Guide First, select your country and carriers (step1) according to your SIM card and input your receiving phone number in “administrator number” and receiving e-mail address in “ Receive Email 1 ” (step3).
MG883G-12mHD 2 Quick Start Guide enter into TEST mode, default the camera in menu setting. There are some functions in TEST mode: custom settings, manual capture, preview or send MMS manually. The remote control is needed in this mode. 2.5 Custom Settings Press MENU on the remote control to enter into the menu setting. The camera can be adjusted to manually customize the camera settings which display on the LCD screen of the camera.
MG883G-12mHD 2 Quick Start Guide The 10s is a buffering time before automatically capturing photos or videos, e.g. for closing and locking the bottom cover, fixing the camera on a tree and walking away. The camera has the sound recording function, so the sound will be embedded in the video clip while capturing a video. 2.7 SMS Control When camera is in ON mode, you can send text message to camera to change some settings. Besides, command of “#T#” can help you to get an on spot image.
MG883G-12mHD 2 Quick Start Guide 2.8 SMS Command List No 1 Function SMS Command Set MMS #m#http://mmsc.cingular.com Parameters #66.209.11.32#8080#wap.cingu lar# account#password# 2 3 4 5 6 7 (The example parameters are for the carrier of AT&T) Set GPRS #s#bmctest123@163.com#b mc123#25#cmnet#smtp.163 Parameters .com#account#password# (The example parameters are for 163 email) Set Normal #n#13800138001#1380013 User’s 8002#13800138003# Phone Set Receive #r#bmc1@sina.com#bmc2 Email @sina.
MG883G-12mHD 8 2 Quick Start Guide interval, mp: send to, Hon: work hour) SD #F# Format Card 9 Set #P#0000# Administrator ’s Password 10 Help #H# Note all sms commands are only available by admin number, each camera has only one admin number. 2.9 Power Off Slide the power switch to OFF position to power off the camera. Please note that even in OFF mode, the camera still consumes a small amount of battery power. Therefore, please remove the batteries if the camera is not in use for a length of time.
MG883G-12mHD 3 Item Settings 3 Item Settings 3.1 Camera Menu To view the camera settings menu, press MENU in TEST mode. With the remote, use “▲” or “▼” key to select the sub-menu, use “◄” or “►” key to select the different options. Press “OK” to save the settings. After changing EACH setting in TEST menu you must press “OK”, otherwise the camera will stay at the default setting. Setting Items Description Choose language you need. It supports Langua four languages: English, Finnish, ge German, Swedish.
MG883G-12mHD 3 Item Settings Burst Video Size after each triggering. Choose the video size: 1280x720 or 640x480. Choose duration of recording video. This parameter is effective and can be adjusted only when the device in the video mode under ON mode. Its value Video extends from 5 to 60 seconds with a step Length of one second. The default value is 10 seconds. Press LEFT and RIGHT to decrease or increase the value by 1 second.
MG883G-12mHD 3 Item Settings more pictures or recording more videos. It is recommended to use high sensitivity degree in room or environment with little interference, and to use lower sensitivity for outdoor or environment with lots of interference like hot wind, smoke, near window etc. Furthermore, the sensitivity of the PIR is strongly related to the temperature. Higher temperature leads to lower sensitivity. Therefore it is suggested to set a higher sensitivity for high temperature environment.
MG883G-12mHD MMS Set GPRS Set Send Mode 3 Item Settings Set Work Hour as off means the camera works all day. The camera sends MMS message through GPRS network, so before using this function, you need to open GPRS service from your service provider. You should set the right MMS setting parameters. The settings of MMS: URL, APN, IP and Port. Please contact the network service provider if you are not familiar with the settings.
MG883G-12mHD 3 Item Settings Daily Report works only in the ON mode, which means that the camera will report the summarized information at the preset time (if the preset time is, eg.20:00PM) on how many pictures it had taken per day. So, you will get a summarized text message with the last picture taken until 20:00PM. If it is on Photo mode, the camera will send a MMS at the preset time. The MMS will show you the latest photo and the total qty of the pictures got taken.
MG883G-12mHD Send To SMS Control Position ID Version Format SD Default 3 Item Settings MMS. 4) “OFF”: To disable communication function. Choose sending the image to your Phone or to Email. Phone[MMS]:Send the image to cell phone via WAP. Email[MMS]:Send the image to Email address via WAP. Email[GPRS]:Send the image to Email address via SMTP. In this way the communication cost will be much cheaper in many countries. SMS Control can enable two way communication function.
MG883G-12mHD Set 3 Item Settings values. 3.
MG883G-12mHD 3 Item Settings APN Send Mode Send To SMS Control Position ID Version Format SD Default Set Daily Report, Manual Instant, Off Email[MM Phone[M S], MS] Email[GPR S] Off On Off A-Z Enter Firmware IMEI Enter Yes, No Save 3.3 Playback Mode In playback mode, images or videos can be viewed and deleted. An image can also be manually sent by MMS or GPRS. It can only be done in TEST mode. The images can be viewed on the LCD screen on camera. The videos can only be viewed on your computer.
MG883G-12mHD 3 Item Settings or DOWN to view the previous and the next one. And OK to return to info display. Note that video can not be displayed on the screen. Delete photo or video: View the image (or video) which to be deleted, select the one you want to delete. Press MENU, then UP or Down to delete. 3.4 Laser Pointer The laser light pointer beam can be turned on as an additional function for pointing to an object or a certain region of interested (ROI) by pressing ﹡ of the remote.
MG883G-12mHD 4 Trouble Shooting 4 Trouble Shooting 1 There is something in front of the camera lens. the camera broken? Is A: The camera is not broken. It’s an IR-cut filter. When the camera is powered on, the IR-cut will be reset and cover the lens. Only when the camera is powered off, the IR-cut will be at a random place. 2 The camera display screen is not working anymore. A: Most likely, no SD card has been inserted in the camera when it is turned on.
MG883G-12mHD 5 PIR Detection Zone 5 PIR Detection Zone This camera has a new design of PIR and the new PIR is patented. The new patented PIR’s detection range can reach to 85ft in good environments. Following picture shows the compared detection zone between normal PIR and the new patented PIR. The PIR detection angle (α) is just smaller than the field of view (FOV) angle (β). The advantage of this design is to reduce empty picture rate and capture most, if not all, motions.
MG883G-12mHD 6 Technical Specification 6 Technical Specifications Image Sensor Lens PIR detection range Display Screen Memory Card Picture Resolution Video Resolution PIR Sensitivity Trigger Time Weight Operation/Storage Tem. Power Supply Low Battery Alert Sound Recording Mounting Dimensions Operation Humidity Security Authentication 5MP Color CMOS, 8MP, 12MP Interpolation F/NO=2.2 FOV(Field of View)=60° 85ft 1.
MG883G-12mHD 7 Parts List 7 Parts List Part Name Digital Camera User Manual Enhanced Antenna Warranty Card Quantity One One One One Down load the APP software from here: http://www.bolyguard.com/download.html Version 1.
FCC RF EXPOSURE INFORMATION: WARNING!! Read this information before using your phone In August 1986 the Federal Communications Commission (FCC) of the United States with its action in Report and Outer FCC 96-326 adopted an updated safety standard for human exposure to radio frequency (RF) electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both U.S. and international standards bodies.
NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
