Inspiration strikes CYCLONE | DR Bolt PP-400DR Dual Outlet Power Pack with Removable Battery User’s Manual
Copyright © 2013 Gradus Group. Bolt and other names of Bolt products are trademarks of Gradus Group. Other product and corporate names mentioned herein are trademarks of their respective holders. All photos are for illustrative purposes only.
Introduction Thank you for choosing Bolt, and congratulations on the purchase of your Bolt PP-400DR Power Pack for Portable Flash. This rechargeable large-capacity lithium-ion battery pack will supply up to 1400 flashes (depending on flash unit and power setting) and fast recycling times for one or two portable flashes at the same time. It’s compatible with most on-camera flashes, including Nikon, Canon, Sony, Bolt, Sunpak, Vivitar, and Metz.
Overview 1 2 3 4 1 Socket cover 2 Cable locking mechanism 3 Socket #1 4 Socket #2 5 Belt clip 6 Charging port 7 Battery pack 9 5 8 6 8 Battery pack lock 9 Control unit 10 Shoulder strap 11 Strap quick release 12 LED battery level indicator 13 Status indicator for Socket #1 14 Power button 15 Status indicator for Socket #2 16 AC battery charger 4 | Overview 7
10 12 13 11 16 15 14 Overview | 5
Warnings ⚠⚡ • Do not disassemble or attempt to service this product yourself. Doing so will void the warranty, and Bolt will not be responsible for any damage. There are high-voltage components inside. Contact can produce a dangerous electric shock. • Keep out of reach of children. • Do not touch the metal part of the multifunction socket. • This product is not water resistant. Keep it away from water and all flammable gases or liquids.
• Use only parts provided by the manufacturer. • Please read and follow these instructions and keep this manual in a safe place. • Make sure the item is intact and that there are no missing parts. Charging the Cyclone DR To charge your Cyclone DR with the included charger: 1. Plug the charger unit into an AC outlet. 2. Plug the charger cable into the charging port on the battery. 3. The charger indicator turning red indicates that the battery is being charged. 4.
To get the maximum capacity from your Cyclone DR: Charge your Cyclone DR shortly before use to ensure that the pack retains the maximum charge. Charge your Cyclone DR at a moderate room temperature, and avoid storing it in hot or cold environments between charging and use. Note: When charging the pack outside of the United States, plug adapters (available separately) may be used to plug the charger into any 100-240 V AC power outlet.
Checking the Cyclone DR’s charge level: When the Cyclone DR is not charging and is not connected to a flash unit, its level of charge can be checked by pressing the power button.
1 Connecting Your Bolt Cyclone DR Power Pack to Your Flash You can use the Cyclone DR to power a wide range of flash units. its level of charge can be checked, you must use a compatible connection cable. Cables sold by some flash and battery pack manufacturers are interchangeable with Bolt cables, but other flash brands use a different connector type. Make sure you select the right one. Important! Load your flash unit with its standard batteries before connecting it to the Cyclone DR.
3 To connect your Cyclone DR to your flash unit: 1. Plug the metal connector of the connection cable firmly into one of the output sockets of the Cyclone DR. 2. If using a cable with a locking mechanism, rotate the locking collar on the terminal to secure the cable. 3. Plug the other end of the connection cable securely into the compatible power port on your flash unit. 4. Press the power button on the Cyclone DR and wait for the Status and battery LEDs to turn on, then power on your flash.
Using Your Flash with Your Cyclone DR Your Cyclone DR can recycle in just 1 second with many popular flash units to keep you shooting and ensure that you don’t miss important moments. With your flash firing at full power, it can power between 1200 and 1400 flashes, depending on the specific unit you’re using. It can power thousands of shots in automatic mode with some flash units. To get the best use out of your Cyclone DR: • Use in environments with moderate temperatures.
Reading the indicator lights while using the Cyclone DR: When you’re using your Cyclone DR, its Red Status LED will remain on to indicate that the flash is ready to fire. Its four blue battery LEDs will indicate the level of charge as follows: Battery LED 1 on: 25% or lower charge level Battery LEDs 1-2 on: 25%-50% charge level Battery LEDs 1-3 on: 50%-75% charge level Battery LEDs 1-4 on: 75% or higher charge level Battery LED 1 flashing: The Cyclone DR has been drained and needs to be charged.
• Padded feet. Two rubberized feet give the Cyclone DR stability and protection when you set it down. • Belt clip. One of the easiest ways to carry the Cyclone DR is to attach it to your belt with the included clip. When you won’t be carrying the pack on your belt, you can give in a cleaner profile by removing the clip. To do this, loosen the screws securing it with a Phillips screwdriver, remove the clip, then tighten the screws again. • Shoulder strap.
Troubleshooting Problem Solution The Cyclone DR is charged and connected to a flash with a cable, but no indicator lights illuminate when you turn it on. The cable is damaged or you are using the wrong cable. The Status indicator light is flashing. The pack is overheated. Turn it off and wait for at least 10 minutes before using it again. The Cyclone DR is charged and connected to a flash with a cable, but the flash does not fire.
Specifications Power Pack Cyclone DR: AC Charger BO-1008: Battery type: lithium-ion Input: 100-240V AC 50/60Hz Voltage: 11.1 V DC Output: 12V DC 1500mA Capacity: 4500 mAh Recycle time with hotshoe-mounted flash units: approx. 1 second (at full flash power) Cord length: 60 in. (1.5 m) Dimensions: 3.75 x 1.25 x 1.62 in. (95 x 32 x 41 mm) Flashes per charge: approx.
Warranty LIMITED ONE-YEAR WARRANTY Bolt provides a limited warranty that this product is free from defects in materials and workmanship to the original purchaser under normal use for a period of one (1) year from the original purchase date or thirty (30) days after replacement (the “Warranty Period”), whichever occurs later. Our responsibility with respect to this limited warranty shall be limited solely to repair or replacement, at its option, of any product which fails during normal consumer use.
Compatible Devices and Accessories The Cyclone DR is compatible with a wide range of hotshoe and handle-mount flash units. Make sure you select a connection cable that is compatible with your flash unit. Many compatible accessories are also available from Bolt and other brands. Bolt connection cables are interchangeable with some other manufacturers’ battery pack connection cables.
BO-1006 CZ Canon Flash Cable With Locking Mechanism BO-1007 CKE Nikon Flash Cable With Locking Mechanism BO-1005 Sony Flash Cable Bolt USB-C Charger for Mobile Devices Compatible Devices | 19
www.boltflashes.
