Data Sheet

MCD-Series: Modular Drop-In Ceiling Speakers

MCD1X2U & MCD2X2U

Assemblies

Unique Modular Design is Economical and Easy to Install

Bogen’s MCD-Series Speakers were designed to offer installers a low-

cost alternative drop-in ceiling speaker. The speakers come in two parts,

speaker module and grille, which are easily assembled by the installer.

Wire connections can be made to the speaker module either before or

after placement in the ceiling. The assemblies will fit into 2’ x 2’ and

2’ x 4’ ceiling grids. For 2’ x 4’ grid installs, a single cut to a ceiling tile is

required, and the supplied tile support rail can be used.

Speaker Module: Model MCDMOD

This compact module is a component of your speaker assembly. The

fully-enclosed speaker module has a 4-1/2” full-range speaker with a

secondary high-frequency radiator. Wide coverage angles of 120

degrees produce a broad sound field for even coverage throughout the

listening area. A rotary switch easily allows for power tap settings of

4, 2, 1, 0.5, and 0.25 watts. For use with 70V and 25V systems.

Ceiling Grilles: MCD1X2UGRILLE & MCD2X2UGRILLE

There are two grille options: The MCD1X2UGRILLE measures 1’ x 2’ and

the MCD2X2UGRILLE measures 2’ x 2’. Both can be placed in either

2’ x 2’ or 2’ x 4’ tile grids, with the use of an included separate tile

support rail. Each ceiling grille has a bright-white, powder-coated finish,

is constructed of industrial grade steel, and includes 3 seismic attach-

ment points. The MCDMOD speaker module simply snaps into place

over the perforated portion of the grille.

How To Order

For your convenience, speaker modules and ceiling grilles can be ordered

as follows with a single model number:

MCD1X2U: MCDMOD speaker module and a 1’ x 2’ ceiling grille.*

MCD2X2U: MCDMOD speaker module and a 2’ x 2’ ceiling grille.*

MCD1X2U

MCDMOD

MCD2X2U

MCD2X2UGRILLE

MCD1X2UGRILLE

*Tile Supprt Rail

(included)

PAGE 1
MCD-Series: Modular Drop-In Ceiling Speakers MCD1X2U & MCD2X2U Assemblies Unique Modular Design is Economical and Easy to Install Bogen’s MCD-Series Speakers were designed to offer installers a lowcost alternative drop-in ceiling speaker. The speakers come in two parts, speaker module and grille, which are easily assembled by the installer. Wire connections can be made to the speaker module either before or after placement in the ceiling. The assemblies will fit into 2’ x 2’ and 2’ x 4’ ceiling grids.
PAGE 2
Drop-In Ceiling Speakers: MCD1X2U & MCD2X2U (assembled) MCD2X2U MCD1X2U 11-1/2” 23-1/2” TILE SUPPORT RAIL CEILING TILE 2x4 (Cut to 2 ft. x 23-1/2 in.) SPEAKER HOLES TO BE SITUATED IN CORNER OF CEILING GRID 2x2 TILE SUPPORT RAIL (Cut to 2 ft. x 11-1/2 in.) 2 ft. x 2 ft. CEILING GRID MCD2X2UGRILLE 2 ft. x 4 ft.