Installation Manual

Foreground Speaker

Model FG15 (B/W)

54-2111-01C 1208

Specifications are subject

to change without notice.

Installation

1. Peel backing off of the Adhesive Foam Rubber Pads and affix them to the

inside of the mounting bracket ears.

Attach bracket to mounting surface using appropriate hardware (user-supplied).

3. Make electrical connections and power settings and then slip the speaker

between the mounting bracket ears and line up the holes.

4. Attach the speaker to the mounting bracket using either the threaded knobs

or the screws and washers for a more tamper-resistant mount. Do not use

the washers with the threaded knobs.

Note: Physical appearance of speaker and bracket may differ from this drawing.

54-2111-01C_Layout 1 7/31/12 10:55 AM Page 1

PAGE 1
54-2111-01C_Layout 1 7/31/12 10:55 AM Page 1 Foreground Speaker Model FG15 (B/W) Installation 1. Peel backing off of the Adhesive Foam Rubber Pads and affix them to the inside of the mounting bracket ears. 2. Attach bracket to mounting surface using appropriate hardware (user-supplied). 3. Make electrical connections and power settings and then slip the speaker between the mounting bracket ears and line up the holes. 4.
PAGE 2
54-2111-01C_Layout 1 7/31/12 10:55 AM Page 2 Limited Warranty; Exclusion of Certain Damages The Bogen Foreground Speaker Model FG15 (B/W) is warranted to be free from defects in material and workmanship for two (2) years from the date of sale to the original purchaser.